libs/SDL2/include/SDL_atomic.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * \file SDL_atomic.h
+ *
+ * Atomic operations.
+ *
+ * IMPORTANT:
+ * If you are not an expert in concurrent lockless programming, you should
+ * only be using the atomic lock and reference counting functions in this
+ * file.  In all other cases you should be protecting your data structures
+ * with full mutexes.
+ *
+ * The list of "safe" functions to use are:
+ *  SDL_AtomicLock()
+ *  SDL_AtomicUnlock()
+ *  SDL_AtomicIncRef()
+ *  SDL_AtomicDecRef()
+ *
+ * Seriously, here be dragons!
+ * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ *
+ * You can find out a little more about lockless programming and the
+ * subtle issues that can arise here:
+ * http://msdn.microsoft.com/en-us/library/ee418650%28v=vs.85%29.aspx
+ *
+ * There's also lots of good information here:
+ * http://www.1024cores.net/home/lock-free-algorithms
+ * http://preshing.com/
+ *
+ * These operations may or may not actually be implemented using
+ * processor specific atomic operations. When possible they are
+ * implemented as true processor specific atomic operations. When that
+ * is not possible the are implemented using locks that *do* use the
+ * available atomic operations.
+ *
+ * All of the atomic operations that modify memory are full memory barriers.
+ */
+
+#ifndef SDL_atomic_h_
+#define SDL_atomic_h_
+
+#include "SDL_stdinc.h"
+#include "SDL_platform.h"
+
+#include "begin_code.h"
+
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \name SDL AtomicLock
+ *
+ * The atomic locks are efficient spinlocks using CPU instructions,
+ * but are vulnerable to starvation and can spin forever if a thread
+ * holding a lock has been terminated.  For this reason you should
+ * minimize the code executed inside an atomic lock and never do
+ * expensive things like API or system calls while holding them.
+ *
+ * The atomic locks are not safe to lock recursively.
+ *
+ * Porting Note:
+ * The spin lock functions and type are required and can not be
+ * emulated because they are used in the atomic emulation code.
+ */
+/* @{ */
+
+typedef int SDL_SpinLock;
+
+/**
+ * \brief Try to lock a spin lock by setting it to a non-zero value.
+ *
+ * \param lock Points to the lock.
+ *
+ * \return SDL_TRUE if the lock succeeded, SDL_FALSE if the lock is already held.
+ */
+extern DECLSPEC SDL_bool SDLCALL SDL_AtomicTryLock(SDL_SpinLock *lock);
+
+/**
+ * \brief Lock a spin lock by setting it to a non-zero value.
+ *
+ * \param lock Points to the lock.
+ */
+extern DECLSPEC void SDLCALL SDL_AtomicLock(SDL_SpinLock *lock);
+
+/**
+ * \brief Unlock a spin lock by setting it to 0. Always returns immediately
+ *
+ * \param lock Points to the lock.
+ */
+extern DECLSPEC void SDLCALL SDL_AtomicUnlock(SDL_SpinLock *lock);
+
+/* @} *//* SDL AtomicLock */
+
+
+/**
+ * The compiler barrier prevents the compiler from reordering
+ * reads and writes to globally visible variables across the call.
+ */
+#if defined(_MSC_VER) && (_MSC_VER > 1200) && !defined(__clang__)
+void _ReadWriteBarrier(void);
+#pragma intrinsic(_ReadWriteBarrier)
+#define SDL_CompilerBarrier()   _ReadWriteBarrier()
+#elif (defined(__GNUC__) && !defined(__EMSCRIPTEN__)) || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120))
+/* This is correct for all CPUs when using GCC or Solaris Studio 12.1+. */
+#define SDL_CompilerBarrier()   __asm__ __volatile__ ("" : : : "memory")
+#elif defined(__WATCOMC__)
+extern _inline void SDL_CompilerBarrier (void);
+#pragma aux SDL_CompilerBarrier = "" parm [] modify exact [];
+#else
+#define SDL_CompilerBarrier()   \
+{ SDL_SpinLock _tmp = 0; SDL_AtomicLock(&_tmp); SDL_AtomicUnlock(&_tmp); }
+#endif
+
+/**
+ * Memory barriers are designed to prevent reads and writes from being
+ * reordered by the compiler and being seen out of order on multi-core CPUs.
+ *
+ * A typical pattern would be for thread A to write some data and a flag,
+ * and for thread B to read the flag and get the data. In this case you
+ * would insert a release barrier between writing the data and the flag,
+ * guaranteeing that the data write completes no later than the flag is
+ * written, and you would insert an acquire barrier between reading the
+ * flag and reading the data, to ensure that all the reads associated
+ * with the flag have completed.
+ *
+ * In this pattern you should always see a release barrier paired with
+ * an acquire barrier and you should gate the data reads/writes with a
+ * single flag variable.
+ *
+ * For more information on these semantics, take a look at the blog post:
+ * http://preshing.com/20120913/acquire-and-release-semantics
+ */
+extern DECLSPEC void SDLCALL SDL_MemoryBarrierReleaseFunction(void);
+extern DECLSPEC void SDLCALL SDL_MemoryBarrierAcquireFunction(void);
+
+#if defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__))
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("lwsync" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("lwsync" : : : "memory")
+#elif defined(__GNUC__) && defined(__aarch64__)
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#elif defined(__GNUC__) && defined(__arm__)
+#if 0 /* defined(__LINUX__) || defined(__ANDROID__) */
+/* Information from:
+   https://chromium.googlesource.com/chromium/chromium/+/trunk/base/atomicops_internals_arm_gcc.h#19
+
+   The Linux kernel provides a helper function which provides the right code for a memory barrier,
+   hard-coded at address 0xffff0fa0
+*/
+typedef void (*SDL_KernelMemoryBarrierFunc)();
+#define SDL_MemoryBarrierRelease()	((SDL_KernelMemoryBarrierFunc)0xffff0fa0)()
+#define SDL_MemoryBarrierAcquire()	((SDL_KernelMemoryBarrierFunc)0xffff0fa0)()
+#elif 0 /* defined(__QNXNTO__) */
+#include <sys/cpuinline.h>
+
+#define SDL_MemoryBarrierRelease()   __cpu_membarrier()
+#define SDL_MemoryBarrierAcquire()   __cpu_membarrier()
+#else
+#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7S__) || defined(__ARM_ARCH_8A__)
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#elif defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_5TE__)
+#ifdef __thumb__
+/* The mcr instruction isn't available in thumb mode, use real functions */
+#define SDL_MEMORY_BARRIER_USES_FUNCTION
+#define SDL_MemoryBarrierRelease()   SDL_MemoryBarrierReleaseFunction()
+#define SDL_MemoryBarrierAcquire()   SDL_MemoryBarrierAcquireFunction()
+#else
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory")
+#endif /* __thumb__ */
+#else
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("" : : : "memory")
+#endif /* __LINUX__ || __ANDROID__ */
+#endif /* __GNUC__ && __arm__ */
+#else
+#if (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120))
+/* This is correct for all CPUs on Solaris when using Solaris Studio 12.1+. */
+#include <mbarrier.h>
+#define SDL_MemoryBarrierRelease()  __machine_rel_barrier()
+#define SDL_MemoryBarrierAcquire()  __machine_acq_barrier()
+#else
+/* This is correct for the x86 and x64 CPUs, and we'll expand this over time. */
+#define SDL_MemoryBarrierRelease()  SDL_CompilerBarrier()
+#define SDL_MemoryBarrierAcquire()  SDL_CompilerBarrier()
+#endif
+#endif
+
+/**
+ * \brief A type representing an atomic integer value.  It is a struct
+ *        so people don't accidentally use numeric operations on it.
+ */
+typedef struct { int value; } SDL_atomic_t;
+
+/**
+ * \brief Set an atomic variable to a new value if it is currently an old value.
+ *
+ * \return SDL_TRUE if the atomic variable was set, SDL_FALSE otherwise.
+ *
+ * \note If you don't know what this function is for, you shouldn't use it!
+*/
+extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCAS(SDL_atomic_t *a, int oldval, int newval);
+
+/**
+ * \brief Set an atomic variable to a value.
+ *
+ * \return The previous value of the atomic variable.
+ */
+extern DECLSPEC int SDLCALL SDL_AtomicSet(SDL_atomic_t *a, int v);
+
+/**
+ * \brief Get the value of an atomic variable
+ */
+extern DECLSPEC int SDLCALL SDL_AtomicGet(SDL_atomic_t *a);
+
+/**
+ * \brief Add to an atomic variable.
+ *
+ * \return The previous value of the atomic variable.
+ *
+ * \note This same style can be used for any number operation
+ */
+extern DECLSPEC int SDLCALL SDL_AtomicAdd(SDL_atomic_t *a, int v);
+
+/**
+ * \brief Increment an atomic variable used as a reference count.
+ */
+#ifndef SDL_AtomicIncRef
+#define SDL_AtomicIncRef(a)    SDL_AtomicAdd(a, 1)
+#endif
+
+/**
+ * \brief Decrement an atomic variable used as a reference count.
+ *
+ * \return SDL_TRUE if the variable reached zero after decrementing,
+ *         SDL_FALSE otherwise
+ */
+#ifndef SDL_AtomicDecRef
+#define SDL_AtomicDecRef(a)    (SDL_AtomicAdd(a, -1) == 1)
+#endif
+
+/**
+ * \brief Set a pointer to a new value if it is currently an old value.
+ *
+ * \return SDL_TRUE if the pointer was set, SDL_FALSE otherwise.
+ *
+ * \note If you don't know what this function is for, you shouldn't use it!
+*/
+extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCASPtr(void **a, void *oldval, void *newval);
+
+/**
+ * \brief Set a pointer to a value atomically.
+ *
+ * \return The previous value of the pointer.
+ */
+extern DECLSPEC void* SDLCALL SDL_AtomicSetPtr(void **a, void* v);
+
+/**
+ * \brief Get the value of a pointer atomically.
+ */
+extern DECLSPEC void* SDLCALL SDL_AtomicGetPtr(void **a);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+
+#include "close_code.h"
+
+#endif /* SDL_atomic_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

libs/SDL2/include/SDL_audio.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_audio.h
+ *
+ *  Access to the raw audio mixing buffer for the SDL library.
+ */
+
+#ifndef SDL_audio_h_
+#define SDL_audio_h_
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+#include "SDL_endian.h"
+#include "SDL_mutex.h"
+#include "SDL_thread.h"
+#include "SDL_rwops.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  \brief Audio format flags.
+ *
+ *  These are what the 16 bits in SDL_AudioFormat currently mean...
+ *  (Unspecified bits are always zero).
+ *
+ *  \verbatim
+    ++-----------------------sample is signed if set
+    ||
+    ||       ++-----------sample is bigendian if set
+    ||       ||
+    ||       ||          ++---sample is float if set
+    ||       ||          ||
+    ||       ||          || +---sample bit size---+
+    ||       ||          || |                     |
+    15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
+    \endverbatim
+ *
+ *  There are macros in SDL 2.0 and later to query these bits.
+ */
+typedef Uint16 SDL_AudioFormat;
+
+/**
+ *  \name Audio flags
+ */
+/* @{ */
+
+#define SDL_AUDIO_MASK_BITSIZE       (0xFF)
+#define SDL_AUDIO_MASK_DATATYPE      (1<<8)
+#define SDL_AUDIO_MASK_ENDIAN        (1<<12)
+#define SDL_AUDIO_MASK_SIGNED        (1<<15)
+#define SDL_AUDIO_BITSIZE(x)         (x & SDL_AUDIO_MASK_BITSIZE)
+#define SDL_AUDIO_ISFLOAT(x)         (x & SDL_AUDIO_MASK_DATATYPE)
+#define SDL_AUDIO_ISBIGENDIAN(x)     (x & SDL_AUDIO_MASK_ENDIAN)
+#define SDL_AUDIO_ISSIGNED(x)        (x & SDL_AUDIO_MASK_SIGNED)
+#define SDL_AUDIO_ISINT(x)           (!SDL_AUDIO_ISFLOAT(x))
+#define SDL_AUDIO_ISLITTLEENDIAN(x)  (!SDL_AUDIO_ISBIGENDIAN(x))
+#define SDL_AUDIO_ISUNSIGNED(x)      (!SDL_AUDIO_ISSIGNED(x))
+
+/**
+ *  \name Audio format flags
+ *
+ *  Defaults to LSB byte order.
+ */
+/* @{ */
+#define AUDIO_U8        0x0008  /**< Unsigned 8-bit samples */
+#define AUDIO_S8        0x8008  /**< Signed 8-bit samples */
+#define AUDIO_U16LSB    0x0010  /**< Unsigned 16-bit samples */
+#define AUDIO_S16LSB    0x8010  /**< Signed 16-bit samples */
+#define AUDIO_U16MSB    0x1010  /**< As above, but big-endian byte order */
+#define AUDIO_S16MSB    0x9010  /**< As above, but big-endian byte order */
+#define AUDIO_U16       AUDIO_U16LSB
+#define AUDIO_S16       AUDIO_S16LSB
+/* @} */
+
+/**
+ *  \name int32 support
+ */
+/* @{ */
+#define AUDIO_S32LSB    0x8020  /**< 32-bit integer samples */
+#define AUDIO_S32MSB    0x9020  /**< As above, but big-endian byte order */
+#define AUDIO_S32       AUDIO_S32LSB
+/* @} */
+
+/**
+ *  \name float32 support
+ */
+/* @{ */
+#define AUDIO_F32LSB    0x8120  /**< 32-bit floating point samples */
+#define AUDIO_F32MSB    0x9120  /**< As above, but big-endian byte order */
+#define AUDIO_F32       AUDIO_F32LSB
+/* @} */
+
+/**
+ *  \name Native audio byte ordering
+ */
+/* @{ */
+#if SDL_BYTEORDER == SDL_LIL_ENDIAN
+#define AUDIO_U16SYS    AUDIO_U16LSB
+#define AUDIO_S16SYS    AUDIO_S16LSB
+#define AUDIO_S32SYS    AUDIO_S32LSB
+#define AUDIO_F32SYS    AUDIO_F32LSB
+#else
+#define AUDIO_U16SYS    AUDIO_U16MSB
+#define AUDIO_S16SYS    AUDIO_S16MSB
+#define AUDIO_S32SYS    AUDIO_S32MSB
+#define AUDIO_F32SYS    AUDIO_F32MSB
+#endif
+/* @} */
+
+/**
+ *  \name Allow change flags
+ *
+ *  Which audio format changes are allowed when opening a device.
+ */
+/* @{ */
+#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE    0x00000001
+#define SDL_AUDIO_ALLOW_FORMAT_CHANGE       0x00000002
+#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE     0x00000004
+#define SDL_AUDIO_ALLOW_SAMPLES_CHANGE      0x00000008
+#define SDL_AUDIO_ALLOW_ANY_CHANGE          (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE|SDL_AUDIO_ALLOW_SAMPLES_CHANGE)
+/* @} */
+
+/* @} *//* Audio flags */
+
+/**
+ *  This function is called when the audio device needs more data.
+ *
+ *  \param userdata An application-specific parameter saved in
+ *                  the SDL_AudioSpec structure
+ *  \param stream A pointer to the audio data buffer.
+ *  \param len    The length of that buffer in bytes.
+ *
+ *  Once the callback returns, the buffer will no longer be valid.
+ *  Stereo samples are stored in a LRLRLR ordering.
+ *
+ *  You can choose to avoid callbacks and use SDL_QueueAudio() instead, if
+ *  you like. Just open your audio device with a NULL callback.
+ */
+typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream,
+                                            int len);
+
+/**
+ *  The calculated values in this structure are calculated by SDL_OpenAudio().
+ *
+ *  For multi-channel audio, the default SDL channel mapping is:
+ *  2:  FL FR                       (stereo)
+ *  3:  FL FR LFE                   (2.1 surround)
+ *  4:  FL FR BL BR                 (quad)
+ *  5:  FL FR FC BL BR              (quad + center)
+ *  6:  FL FR FC LFE SL SR          (5.1 surround - last two can also be BL BR)
+ *  7:  FL FR FC LFE BC SL SR       (6.1 surround)
+ *  8:  FL FR FC LFE BL BR SL SR    (7.1 surround)
+ */
+typedef struct SDL_AudioSpec
+{
+    int freq;                   /**< DSP frequency -- samples per second */
+    SDL_AudioFormat format;     /**< Audio data format */
+    Uint8 channels;             /**< Number of channels: 1 mono, 2 stereo */
+    Uint8 silence;              /**< Audio buffer silence value (calculated) */
+    Uint16 samples;             /**< Audio buffer size in sample FRAMES (total samples divided by channel count) */
+    Uint16 padding;             /**< Necessary for some compile environments */
+    Uint32 size;                /**< Audio buffer size in bytes (calculated) */
+    SDL_AudioCallback callback; /**< Callback that feeds the audio device (NULL to use SDL_QueueAudio()). */
+    void *userdata;             /**< Userdata passed to callback (ignored for NULL callbacks). */
+} SDL_AudioSpec;
+
+
+struct SDL_AudioCVT;
+typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt,
+                                          SDL_AudioFormat format);
+
+/**
+ *  \brief Upper limit of filters in SDL_AudioCVT
+ *
+ *  The maximum number of SDL_AudioFilter functions in SDL_AudioCVT is
+ *  currently limited to 9. The SDL_AudioCVT.filters array has 10 pointers,
+ *  one of which is the terminating NULL pointer.
+ */
+#define SDL_AUDIOCVT_MAX_FILTERS 9
+
+/**
+ *  \struct SDL_AudioCVT
+ *  \brief A structure to hold a set of audio conversion filters and buffers.
+ *
+ *  Note that various parts of the conversion pipeline can take advantage
+ *  of SIMD operations (like SSE2, for example). SDL_AudioCVT doesn't require
+ *  you to pass it aligned data, but can possibly run much faster if you
+ *  set both its (buf) field to a pointer that is aligned to 16 bytes, and its
+ *  (len) field to something that's a multiple of 16, if possible.
+ */
+#ifdef __GNUC__
+/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't
+   pad it out to 88 bytes to guarantee ABI compatibility between compilers.
+   vvv
+   The next time we rev the ABI, make sure to size the ints and add padding.
+*/
+#define SDL_AUDIOCVT_PACKED __attribute__((packed))
+#else
+#define SDL_AUDIOCVT_PACKED
+#endif
+/* */
+typedef struct SDL_AudioCVT
+{
+    int needed;                 /**< Set to 1 if conversion possible */
+    SDL_AudioFormat src_format; /**< Source audio format */
+    SDL_AudioFormat dst_format; /**< Target audio format */
+    double rate_incr;           /**< Rate conversion increment */
+    Uint8 *buf;                 /**< Buffer to hold entire audio data */
+    int len;                    /**< Length of original audio buffer */
+    int len_cvt;                /**< Length of converted audio buffer */
+    int len_mult;               /**< buffer must be len*len_mult big */
+    double len_ratio;           /**< Given len, final size is len*len_ratio */
+    SDL_AudioFilter filters[SDL_AUDIOCVT_MAX_FILTERS + 1]; /**< NULL-terminated list of filter functions */
+    int filter_index;           /**< Current audio conversion function */
+} SDL_AUDIOCVT_PACKED SDL_AudioCVT;
+
+
+/* Function prototypes */
+
+/**
+ *  \name Driver discovery functions
+ *
+ *  These functions return the list of built in audio drivers, in the
+ *  order that they are normally initialized by default.
+ */
+/* @{ */
+extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void);
+extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index);
+/* @} */
+
+/**
+ *  \name Initialization and cleanup
+ *
+ *  \internal These functions are used internally, and should not be used unless
+ *            you have a specific need to specify the audio driver you want to
+ *            use.  You should normally use SDL_Init() or SDL_InitSubSystem().
+ */
+/* @{ */
+extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name);
+extern DECLSPEC void SDLCALL SDL_AudioQuit(void);
+/* @} */
+
+/**
+ *  This function returns the name of the current audio driver, or NULL
+ *  if no driver has been initialized.
+ */
+extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void);
+
+/**
+ *  This function opens the audio device with the desired parameters, and
+ *  returns 0 if successful, placing the actual hardware parameters in the
+ *  structure pointed to by \c obtained.  If \c obtained is NULL, the audio
+ *  data passed to the callback function will be guaranteed to be in the
+ *  requested format, and will be automatically converted to the hardware
+ *  audio format if necessary.  This function returns -1 if it failed
+ *  to open the audio device, or couldn't set up the audio thread.
+ *
+ *  When filling in the desired audio spec structure,
+ *    - \c desired->freq should be the desired audio frequency in samples-per-
+ *      second.
+ *    - \c desired->format should be the desired audio format.
+ *    - \c desired->samples is the desired size of the audio buffer, in
+ *      samples.  This number should be a power of two, and may be adjusted by
+ *      the audio driver to a value more suitable for the hardware.  Good values
+ *      seem to range between 512 and 8096 inclusive, depending on the
+ *      application and CPU speed.  Smaller values yield faster response time,
+ *      but can lead to underflow if the application is doing heavy processing
+ *      and cannot fill the audio buffer in time.  A stereo sample consists of
+ *      both right and left channels in LR ordering.
+ *      Note that the number of samples is directly related to time by the
+ *      following formula:  \code ms = (samples*1000)/freq \endcode
+ *    - \c desired->size is the size in bytes of the audio buffer, and is
+ *      calculated by SDL_OpenAudio().
+ *    - \c desired->silence is the value used to set the buffer to silence,
+ *      and is calculated by SDL_OpenAudio().
+ *    - \c desired->callback should be set to a function that will be called
+ *      when the audio device is ready for more data.  It is passed a pointer
+ *      to the audio buffer, and the length in bytes of the audio buffer.
+ *      This function usually runs in a separate thread, and so you should
+ *      protect data structures that it accesses by calling SDL_LockAudio()
+ *      and SDL_UnlockAudio() in your code. Alternately, you may pass a NULL
+ *      pointer here, and call SDL_QueueAudio() with some frequency, to queue
+ *      more audio samples to be played (or for capture devices, call
+ *      SDL_DequeueAudio() with some frequency, to obtain audio samples).
+ *    - \c desired->userdata is passed as the first parameter to your callback
+ *      function. If you passed a NULL callback, this value is ignored.
+ *
+ *  The audio device starts out playing silence when it's opened, and should
+ *  be enabled for playing by calling \c SDL_PauseAudio(0) when you are ready
+ *  for your audio callback function to be called.  Since the audio driver
+ *  may modify the requested size of the audio buffer, you should allocate
+ *  any local mixing buffers after you open the audio device.
+ */
+extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired,
+                                          SDL_AudioSpec * obtained);
+
+/**
+ *  SDL Audio Device IDs.
+ *
+ *  A successful call to SDL_OpenAudio() is always device id 1, and legacy
+ *  SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls
+ *  always returns devices >= 2 on success. The legacy calls are good both
+ *  for backwards compatibility and when you don't care about multiple,
+ *  specific, or capture devices.
+ */
+typedef Uint32 SDL_AudioDeviceID;
+
+/**
+ *  Get the number of available devices exposed by the current driver.
+ *  Only valid after a successfully initializing the audio subsystem.
+ *  Returns -1 if an explicit list of devices can't be determined; this is
+ *  not an error. For example, if SDL is set up to talk to a remote audio
+ *  server, it can't list every one available on the Internet, but it will
+ *  still allow a specific host to be specified to SDL_OpenAudioDevice().
+ *
+ *  In many common cases, when this function returns a value <= 0, it can still
+ *  successfully open the default device (NULL for first argument of
+ *  SDL_OpenAudioDevice()).
+ */
+extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture);
+
+/**
+ *  Get the human-readable name of a specific audio device.
+ *  Must be a value between 0 and (number of audio devices-1).
+ *  Only valid after a successfully initializing the audio subsystem.
+ *  The values returned by this function reflect the latest call to
+ *  SDL_GetNumAudioDevices(); recall that function to redetect available
+ *  hardware.
+ *
+ *  The string returned by this function is UTF-8 encoded, read-only, and
+ *  managed internally. You are not to free it. If you need to keep the
+ *  string for any length of time, you should make your own copy of it, as it
+ *  will be invalid next time any of several other SDL functions is called.
+ */
+extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index,
+                                                           int iscapture);
+
+
+/**
+ *  Open a specific audio device. Passing in a device name of NULL requests
+ *  the most reasonable default (and is equivalent to calling SDL_OpenAudio()).
+ *
+ *  The device name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but
+ *  some drivers allow arbitrary and driver-specific strings, such as a
+ *  hostname/IP address for a remote audio server, or a filename in the
+ *  diskaudio driver.
+ *
+ *  \return 0 on error, a valid device ID that is >= 2 on success.
+ *
+ *  SDL_OpenAudio(), unlike this function, always acts on device ID 1.
+ */
+extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice(const char
+                                                              *device,
+                                                              int iscapture,
+                                                              const
+                                                              SDL_AudioSpec *
+                                                              desired,
+                                                              SDL_AudioSpec *
+                                                              obtained,
+                                                              int
+                                                              allowed_changes);
+
+
+
+/**
+ *  \name Audio state
+ *
+ *  Get the current audio state.
+ */
+/* @{ */
+typedef enum
+{
+    SDL_AUDIO_STOPPED = 0,
+    SDL_AUDIO_PLAYING,
+    SDL_AUDIO_PAUSED
+} SDL_AudioStatus;
+extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void);
+
+extern DECLSPEC SDL_AudioStatus SDLCALL
+SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev);
+/* @} *//* Audio State */
+
+/**
+ *  \name Pause audio functions
+ *
+ *  These functions pause and unpause the audio callback processing.
+ *  They should be called with a parameter of 0 after opening the audio
+ *  device to start playing sound.  This is so you can safely initialize
+ *  data for your callback function after opening the audio device.
+ *  Silence will be written to the audio device during the pause.
+ */
+/* @{ */
+extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on);
+extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev,
+                                                  int pause_on);
+/* @} *//* Pause audio functions */
+
+/**
+ *  \brief Load the audio data of a WAVE file into memory
+ *
+ *  Loading a WAVE file requires \c src, \c spec, \c audio_buf and \c audio_len
+ *  to be valid pointers. The entire data portion of the file is then loaded
+ *  into memory and decoded if necessary.
+ *
+ *  If \c freesrc is non-zero, the data source gets automatically closed and
+ *  freed before the function returns.
+ *
+ *  Supported are RIFF WAVE files with the formats PCM (8, 16, 24, and 32 bits),
+ *  IEEE Float (32 bits), Microsoft ADPCM and IMA ADPCM (4 bits), and A-law and
+ *  µ-law (8 bits). Other formats are currently unsupported and cause an error.
+ *
+ *  If this function succeeds, the pointer returned by it is equal to \c spec
+ *  and the pointer to the audio data allocated by the function is written to
+ *  \c audio_buf and its length in bytes to \c audio_len. The \ref SDL_AudioSpec
+ *  members \c freq, \c channels, and \c format are set to the values of the
+ *  audio data in the buffer. The \c samples member is set to a sane default and
+ *  all others are set to zero.
+ *
+ *  It's necessary to use SDL_FreeWAV() to free the audio data returned in
+ *  \c audio_buf when it is no longer used.
+ *
+ *  Because of the underspecification of the Waveform format, there are many
+ *  problematic files in the wild that cause issues with strict decoders. To
+ *  provide compatibility with these files, this decoder is lenient in regards
+ *  to the truncation of the file, the fact chunk, and the size of the RIFF
+ *  chunk. The hints SDL_HINT_WAVE_RIFF_CHUNK_SIZE, SDL_HINT_WAVE_TRUNCATION,
+ *  and SDL_HINT_WAVE_FACT_CHUNK can be used to tune the behavior of the
+ *  loading process.
+ *
+ *  Any file that is invalid (due to truncation, corruption, or wrong values in
+ *  the headers), too big, or unsupported causes an error. Additionally, any
+ *  critical I/O error from the data source will terminate the loading process
+ *  with an error. The function returns NULL on error and in all cases (with the
+ *  exception of \c src being NULL), an appropriate error message will be set.
+ *
+ *  It is required that the data source supports seeking.
+ *
+ *  Example:
+ *  \code
+ *      SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...);
+ *  \endcode
+ *
+ *  \param src The data source with the WAVE data
+ *  \param freesrc A integer value that makes the function close the data source if non-zero
+ *  \param spec A pointer filled with the audio format of the audio data
+ *  \param audio_buf A pointer filled with the audio data allocated by the function
+ *  \param audio_len A pointer filled with the length of the audio data buffer in bytes
+ *  \return NULL on error, or non-NULL on success.
+ */
+extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src,
+                                                      int freesrc,
+                                                      SDL_AudioSpec * spec,
+                                                      Uint8 ** audio_buf,
+                                                      Uint32 * audio_len);
+
+/**
+ *  Loads a WAV from a file.
+ *  Compatibility convenience function.
+ */
+#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \
+    SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len)
+
+/**
+ *  This function frees data previously allocated with SDL_LoadWAV_RW()
+ */
+extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf);
+
+/**
+ *  This function takes a source format and rate and a destination format
+ *  and rate, and initializes the \c cvt structure with information needed
+ *  by SDL_ConvertAudio() to convert a buffer of audio data from one format
+ *  to the other. An unsupported format causes an error and -1 will be returned.
+ *
+ *  \return 0 if no conversion is needed, 1 if the audio filter is set up,
+ *  or -1 on error.
+ */
+extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt,
+                                              SDL_AudioFormat src_format,
+                                              Uint8 src_channels,
+                                              int src_rate,
+                                              SDL_AudioFormat dst_format,
+                                              Uint8 dst_channels,
+                                              int dst_rate);
+
+/**
+ *  Once you have initialized the \c cvt structure using SDL_BuildAudioCVT(),
+ *  created an audio buffer \c cvt->buf, and filled it with \c cvt->len bytes of
+ *  audio data in the source format, this function will convert it in-place
+ *  to the desired format.
+ *
+ *  The data conversion may expand the size of the audio data, so the buffer
+ *  \c cvt->buf should be allocated after the \c cvt structure is initialized by
+ *  SDL_BuildAudioCVT(), and should be \c cvt->len*cvt->len_mult bytes long.
+ *
+ *  \return 0 on success or -1 if \c cvt->buf is NULL.
+ */
+extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt);
+
+/* SDL_AudioStream is a new audio conversion interface.
+   The benefits vs SDL_AudioCVT:
+    - it can handle resampling data in chunks without generating
+      artifacts, when it doesn't have the complete buffer available.
+    - it can handle incoming data in any variable size.
+    - You push data as you have it, and pull it when you need it
+ */
+/* this is opaque to the outside world. */
+struct _SDL_AudioStream;
+typedef struct _SDL_AudioStream SDL_AudioStream;
+
+/**
+ *  Create a new audio stream
+ *
+ *  \param src_format The format of the source audio
+ *  \param src_channels The number of channels of the source audio
+ *  \param src_rate The sampling rate of the source audio
+ *  \param dst_format The format of the desired audio output
+ *  \param dst_channels The number of channels of the desired audio output
+ *  \param dst_rate The sampling rate of the desired audio output
+ *  \return 0 on success, or -1 on error.
+ *
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_AudioStreamClear
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC SDL_AudioStream * SDLCALL SDL_NewAudioStream(const SDL_AudioFormat src_format,
+                                           const Uint8 src_channels,
+                                           const int src_rate,
+                                           const SDL_AudioFormat dst_format,
+                                           const Uint8 dst_channels,
+                                           const int dst_rate);
+
+/**
+ *  Add data to be converted/resampled to the stream
+ *
+ *  \param stream The stream the audio data is being added to
+ *  \param buf A pointer to the audio data to add
+ *  \param len The number of bytes to write to the stream
+ *  \return 0 on success, or -1 on error.
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_AudioStreamClear
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC int SDLCALL SDL_AudioStreamPut(SDL_AudioStream *stream, const void *buf, int len);
+
+/**
+ *  Get converted/resampled data from the stream
+ *
+ *  \param stream The stream the audio is being requested from
+ *  \param buf A buffer to fill with audio data
+ *  \param len The maximum number of bytes to fill
+ *  \return The number of bytes read from the stream, or -1 on error
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_AudioStreamClear
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC int SDLCALL SDL_AudioStreamGet(SDL_AudioStream *stream, void *buf, int len);
+
+/**
+ * Get the number of converted/resampled bytes available. The stream may be
+ *  buffering data behind the scenes until it has enough to resample
+ *  correctly, so this number might be lower than what you expect, or even
+ *  be zero. Add more data or flush the stream if you need the data now.
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_AudioStreamClear
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC int SDLCALL SDL_AudioStreamAvailable(SDL_AudioStream *stream);
+
+/**
+ * Tell the stream that you're done sending data, and anything being buffered
+ *  should be converted/resampled and made available immediately.
+ *
+ * It is legal to add more data to a stream after flushing, but there will
+ *  be audio gaps in the output. Generally this is intended to signal the
+ *  end of input, so the complete output becomes available.
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamClear
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC int SDLCALL SDL_AudioStreamFlush(SDL_AudioStream *stream);
+
+/**
+ *  Clear any pending data in the stream without converting it
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_FreeAudioStream
+ */
+extern DECLSPEC void SDLCALL SDL_AudioStreamClear(SDL_AudioStream *stream);
+
+/**
+ * Free an audio stream
+ *
+ *  \sa SDL_NewAudioStream
+ *  \sa SDL_AudioStreamPut
+ *  \sa SDL_AudioStreamGet
+ *  \sa SDL_AudioStreamAvailable
+ *  \sa SDL_AudioStreamFlush
+ *  \sa SDL_AudioStreamClear
+ */
+extern DECLSPEC void SDLCALL SDL_FreeAudioStream(SDL_AudioStream *stream);
+
+#define SDL_MIX_MAXVOLUME 128
+/**
+ *  This takes two audio buffers of the playing audio format and mixes
+ *  them, performing addition, volume adjustment, and overflow clipping.
+ *  The volume ranges from 0 - 128, and should be set to ::SDL_MIX_MAXVOLUME
+ *  for full audio volume.  Note this does not change hardware volume.
+ *  This is provided for convenience -- you can mix your own audio data.
+ */
+extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src,
+                                          Uint32 len, int volume);
+
+/**
+ *  This works like SDL_MixAudio(), but you specify the audio format instead of
+ *  using the format of audio device 1. Thus it can be used when no audio
+ *  device is open at all.
+ */
+extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst,
+                                                const Uint8 * src,
+                                                SDL_AudioFormat format,
+                                                Uint32 len, int volume);
+
+/**
+ *  Queue more audio on non-callback devices.
+ *
+ *  (If you are looking to retrieve queued audio from a non-callback capture
+ *  device, you want SDL_DequeueAudio() instead. This will return -1 to
+ *  signify an error if you use it with capture devices.)
+ *
+ *  SDL offers two ways to feed audio to the device: you can either supply a
+ *  callback that SDL triggers with some frequency to obtain more audio
+ *  (pull method), or you can supply no callback, and then SDL will expect
+ *  you to supply data at regular intervals (push method) with this function.
+ *
+ *  There are no limits on the amount of data you can queue, short of
+ *  exhaustion of address space. Queued data will drain to the device as
+ *  necessary without further intervention from you. If the device needs
+ *  audio but there is not enough queued, it will play silence to make up
+ *  the difference. This means you will have skips in your audio playback
+ *  if you aren't routinely queueing sufficient data.
+ *
+ *  This function copies the supplied data, so you are safe to free it when
+ *  the function returns. This function is thread-safe, but queueing to the
+ *  same device from two threads at once does not promise which buffer will
+ *  be queued first.
+ *
+ *  You may not queue audio on a device that is using an application-supplied
+ *  callback; doing so returns an error. You have to use the audio callback
+ *  or queue audio with this function, but not both.
+ *
+ *  You should not call SDL_LockAudio() on the device before queueing; SDL
+ *  handles locking internally for this function.
+ *
+ *  \param dev The device ID to which we will queue audio.
+ *  \param data The data to queue to the device for later playback.
+ *  \param len The number of bytes (not samples!) to which (data) points.
+ *  \return 0 on success, or -1 on error.
+ *
+ *  \sa SDL_GetQueuedAudioSize
+ *  \sa SDL_ClearQueuedAudio
+ */
+extern DECLSPEC int SDLCALL SDL_QueueAudio(SDL_AudioDeviceID dev, const void *data, Uint32 len);
+
+/**
+ *  Dequeue more audio on non-callback devices.
+ *
+ *  (If you are looking to queue audio for output on a non-callback playback
+ *  device, you want SDL_QueueAudio() instead. This will always return 0
+ *  if you use it with playback devices.)
+ *
+ *  SDL offers two ways to retrieve audio from a capture device: you can
+ *  either supply a callback that SDL triggers with some frequency as the
+ *  device records more audio data, (push method), or you can supply no
+ *  callback, and then SDL will expect you to retrieve data at regular
+ *  intervals (pull method) with this function.
+ *
+ *  There are no limits on the amount of data you can queue, short of
+ *  exhaustion of address space. Data from the device will keep queuing as
+ *  necessary without further intervention from you. This means you will
+ *  eventually run out of memory if you aren't routinely dequeueing data.
+ *
+ *  Capture devices will not queue data when paused; if you are expecting
+ *  to not need captured audio for some length of time, use
+ *  SDL_PauseAudioDevice() to stop the capture device from queueing more
+ *  data. This can be useful during, say, level loading times. When
+ *  unpaused, capture devices will start queueing data from that point,
+ *  having flushed any capturable data available while paused.
+ *
+ *  This function is thread-safe, but dequeueing from the same device from
+ *  two threads at once does not promise which thread will dequeued data
+ *  first.
+ *
+ *  You may not dequeue audio from a device that is using an
+ *  application-supplied callback; doing so returns an error. You have to use
+ *  the audio callback, or dequeue audio with this function, but not both.
+ *
+ *  You should not call SDL_LockAudio() on the device before queueing; SDL
+ *  handles locking internally for this function.
+ *
+ *  \param dev The device ID from which we will dequeue audio.
+ *  \param data A pointer into where audio data should be copied.
+ *  \param len The number of bytes (not samples!) to which (data) points.
+ *  \return number of bytes dequeued, which could be less than requested.
+ *
+ *  \sa SDL_GetQueuedAudioSize
+ *  \sa SDL_ClearQueuedAudio
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_DequeueAudio(SDL_AudioDeviceID dev, void *data, Uint32 len);
+
+/**
+ *  Get the number of bytes of still-queued audio.
+ *
+ *  For playback device:
+ *
+ *    This is the number of bytes that have been queued for playback with
+ *    SDL_QueueAudio(), but have not yet been sent to the hardware. This
+ *    number may shrink at any time, so this only informs of pending data.
+ *
+ *    Once we've sent it to the hardware, this function can not decide the
+ *    exact byte boundary of what has been played. It's possible that we just
+ *    gave the hardware several kilobytes right before you called this
+ *    function, but it hasn't played any of it yet, or maybe half of it, etc.
+ *
+ *  For capture devices:
+ *
+ *    This is the number of bytes that have been captured by the device and
+ *    are waiting for you to dequeue. This number may grow at any time, so
+ *    this only informs of the lower-bound of available data.
+ *
+ *  You may not queue audio on a device that is using an application-supplied
+ *  callback; calling this function on such a device always returns 0.
+ *  You have to queue audio with SDL_QueueAudio()/SDL_DequeueAudio(), or use
+ *  the audio callback, but not both.
+ *
+ *  You should not call SDL_LockAudio() on the device before querying; SDL
+ *  handles locking internally for this function.
+ *
+ *  \param dev The device ID of which we will query queued audio size.
+ *  \return Number of bytes (not samples!) of queued audio.
+ *
+ *  \sa SDL_QueueAudio
+ *  \sa SDL_ClearQueuedAudio
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_GetQueuedAudioSize(SDL_AudioDeviceID dev);
+
+/**
+ *  Drop any queued audio data. For playback devices, this is any queued data
+ *  still waiting to be submitted to the hardware. For capture devices, this
+ *  is any data that was queued by the device that hasn't yet been dequeued by
+ *  the application.
+ *
+ *  Immediately after this call, SDL_GetQueuedAudioSize() will return 0. For
+ *  playback devices, the hardware will start playing silence if more audio
+ *  isn't queued. Unpaused capture devices will start filling the queue again
+ *  as soon as they have more data available (which, depending on the state
+ *  of the hardware and the thread, could be before this function call
+ *  returns!).
+ *
+ *  This will not prevent playback of queued audio that's already been sent
+ *  to the hardware, as we can not undo that, so expect there to be some
+ *  fraction of a second of audio that might still be heard. This can be
+ *  useful if you want to, say, drop any pending music during a level change
+ *  in your game.
+ *
+ *  You may not queue audio on a device that is using an application-supplied
+ *  callback; calling this function on such a device is always a no-op.
+ *  You have to queue audio with SDL_QueueAudio()/SDL_DequeueAudio(), or use
+ *  the audio callback, but not both.
+ *
+ *  You should not call SDL_LockAudio() on the device before clearing the
+ *  queue; SDL handles locking internally for this function.
+ *
+ *  This function always succeeds and thus returns void.
+ *
+ *  \param dev The device ID of which to clear the audio queue.
+ *
+ *  \sa SDL_QueueAudio
+ *  \sa SDL_GetQueuedAudioSize
+ */
+extern DECLSPEC void SDLCALL SDL_ClearQueuedAudio(SDL_AudioDeviceID dev);
+
+
+/**
+ *  \name Audio lock functions
+ *
+ *  The lock manipulated by these functions protects the callback function.
+ *  During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that
+ *  the callback function is not running.  Do not call these from the callback
+ *  function or you will cause deadlock.
+ */
+/* @{ */
+extern DECLSPEC void SDLCALL SDL_LockAudio(void);
+extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev);
+extern DECLSPEC void SDLCALL SDL_UnlockAudio(void);
+extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev);
+/* @} *//* Audio lock functions */
+
+/**
+ *  This function shuts down audio processing and closes the audio device.
+ */
+extern DECLSPEC void SDLCALL SDL_CloseAudio(void);
+extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_audio_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

libs/SDL2/include/SDL_bits.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_bits.h
+ *
+ *  Functions for fiddling with bits and bitmasks.
+ */
+
+#ifndef SDL_bits_h_
+#define SDL_bits_h_
+
+#include "SDL_stdinc.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  \file SDL_bits.h
+ */
+
+/**
+ *  Get the index of the most significant bit. Result is undefined when called
+ *  with 0. This operation can also be stated as "count leading zeroes" and
+ *  "log base 2".
+ *
+ *  \return Index of the most significant bit, or -1 if the value is 0.
+ */
+#if defined(__WATCOMC__) && defined(__386__)
+extern _inline int _SDL_clz_watcom (Uint32);
+#pragma aux _SDL_clz_watcom = \
+    "bsr eax, eax" \
+    "xor eax, 31" \
+    parm [eax] nomemory \
+    value [eax] \
+    modify exact [eax] nomemory;
+#endif
+
+SDL_FORCE_INLINE int
+SDL_MostSignificantBitIndex32(Uint32 x)
+{
+#if defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4))
+    /* Count Leading Zeroes builtin in GCC.
+     * http://gcc.gnu.org/onlinedocs/gcc-4.3.4/gcc/Other-Builtins.html
+     */
+    if (x == 0) {
+        return -1;
+    }
+    return 31 - __builtin_clz(x);
+#elif defined(__WATCOMC__) && defined(__386__)
+    if (x == 0) {
+        return -1;
+    }
+    return 31 - _SDL_clz_watcom(x);
+#else
+    /* Based off of Bit Twiddling Hacks by Sean Eron Anderson
+     * <seander@cs.stanford.edu>, released in the public domain.
+     * http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog
+     */
+    const Uint32 b[] = {0x2, 0xC, 0xF0, 0xFF00, 0xFFFF0000};
+    const int    S[] = {1, 2, 4, 8, 16};
+
+    int msbIndex = 0;
+    int i;
+
+    if (x == 0) {
+        return -1;
+    }
+
+    for (i = 4; i >= 0; i--)
+    {
+        if (x & b[i])
+        {
+            x >>= S[i];
+            msbIndex |= S[i];
+        }
+    }
+
+    return msbIndex;
+#endif
+}
+
+SDL_FORCE_INLINE SDL_bool
+SDL_HasExactlyOneBitSet32(Uint32 x)
+{
+    if (x && !(x & (x - 1))) {
+        return SDL_TRUE;
+    }
+    return SDL_FALSE;
+}
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_bits_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

libs/SDL2/include/SDL_blendmode.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_blendmode.h
+ *
+ *  Header file declaring the SDL_BlendMode enumeration
+ */
+
+#ifndef SDL_blendmode_h_
+#define SDL_blendmode_h_
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  \brief The blend mode used in SDL_RenderCopy() and drawing operations.
+ */
+typedef enum
+{
+    SDL_BLENDMODE_NONE = 0x00000000,     /**< no blending
+                                              dstRGBA = srcRGBA */
+    SDL_BLENDMODE_BLEND = 0x00000001,    /**< alpha blending
+                                              dstRGB = (srcRGB * srcA) + (dstRGB * (1-srcA))
+                                              dstA = srcA + (dstA * (1-srcA)) */
+    SDL_BLENDMODE_ADD = 0x00000002,      /**< additive blending
+                                              dstRGB = (srcRGB * srcA) + dstRGB
+                                              dstA = dstA */
+    SDL_BLENDMODE_MOD = 0x00000004,      /**< color modulate
+                                              dstRGB = srcRGB * dstRGB
+                                              dstA = dstA */
+    SDL_BLENDMODE_INVALID = 0x7FFFFFFF
+
+    /* Additional custom blend modes can be returned by SDL_ComposeCustomBlendMode() */
+
+} SDL_BlendMode;
+
+/**
+ *  \brief The blend operation used when combining source and destination pixel components
+ */
+typedef enum
+{
+    SDL_BLENDOPERATION_ADD              = 0x1,  /**< dst + src: supported by all renderers */
+    SDL_BLENDOPERATION_SUBTRACT         = 0x2,  /**< dst - src : supported by D3D9, D3D11, OpenGL, OpenGLES */
+    SDL_BLENDOPERATION_REV_SUBTRACT     = 0x3,  /**< src - dst : supported by D3D9, D3D11, OpenGL, OpenGLES */
+    SDL_BLENDOPERATION_MINIMUM          = 0x4,  /**< min(dst, src) : supported by D3D11 */
+    SDL_BLENDOPERATION_MAXIMUM          = 0x5   /**< max(dst, src) : supported by D3D11 */
+
+} SDL_BlendOperation;
+
+/**
+ *  \brief The normalized factor used to multiply pixel components
+ */
+typedef enum
+{
+    SDL_BLENDFACTOR_ZERO                = 0x1,  /**< 0, 0, 0, 0 */
+    SDL_BLENDFACTOR_ONE                 = 0x2,  /**< 1, 1, 1, 1 */
+    SDL_BLENDFACTOR_SRC_COLOR           = 0x3,  /**< srcR, srcG, srcB, srcA */
+    SDL_BLENDFACTOR_ONE_MINUS_SRC_COLOR = 0x4,  /**< 1-srcR, 1-srcG, 1-srcB, 1-srcA */
+    SDL_BLENDFACTOR_SRC_ALPHA           = 0x5,  /**< srcA, srcA, srcA, srcA */
+    SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA = 0x6,  /**< 1-srcA, 1-srcA, 1-srcA, 1-srcA */
+    SDL_BLENDFACTOR_DST_COLOR           = 0x7,  /**< dstR, dstG, dstB, dstA */
+    SDL_BLENDFACTOR_ONE_MINUS_DST_COLOR = 0x8,  /**< 1-dstR, 1-dstG, 1-dstB, 1-dstA */
+    SDL_BLENDFACTOR_DST_ALPHA           = 0x9,  /**< dstA, dstA, dstA, dstA */
+    SDL_BLENDFACTOR_ONE_MINUS_DST_ALPHA = 0xA   /**< 1-dstA, 1-dstA, 1-dstA, 1-dstA */
+
+} SDL_BlendFactor;
+
+/**
+ *  \brief Create a custom blend mode, which may or may not be supported by a given renderer
+ *
+ *  \param srcColorFactor source color factor
+ *  \param dstColorFactor destination color factor
+ *  \param colorOperation color operation
+ *  \param srcAlphaFactor source alpha factor
+ *  \param dstAlphaFactor destination alpha factor
+ *  \param alphaOperation alpha operation
+ *
+ *  The result of the blend mode operation will be:
+ *      dstRGB = dstRGB * dstColorFactor colorOperation srcRGB * srcColorFactor
+ *  and
+ *      dstA = dstA * dstAlphaFactor alphaOperation srcA * srcAlphaFactor
+ */
+extern DECLSPEC SDL_BlendMode SDLCALL SDL_ComposeCustomBlendMode(SDL_BlendFactor srcColorFactor,
+                                                                 SDL_BlendFactor dstColorFactor,
+                                                                 SDL_BlendOperation colorOperation,
+                                                                 SDL_BlendFactor srcAlphaFactor,
+                                                                 SDL_BlendFactor dstAlphaFactor,
+                                                                 SDL_BlendOperation alphaOperation);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_blendmode_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

libs/SDL2/include/SDL_clipboard.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * \file SDL_clipboard.h
+ *
+ * Include file for SDL clipboard handling
+ */
+
+#ifndef SDL_clipboard_h_
+#define SDL_clipboard_h_
+
+#include "SDL_stdinc.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Function prototypes */
+
+/**
+ * \brief Put UTF-8 text into the clipboard
+ *
+ * \sa SDL_GetClipboardText()
+ */
+extern DECLSPEC int SDLCALL SDL_SetClipboardText(const char *text);
+
+/**
+ * \brief Get UTF-8 text from the clipboard, which must be freed with SDL_free()
+ *
+ * \sa SDL_SetClipboardText()
+ */
+extern DECLSPEC char * SDLCALL SDL_GetClipboardText(void);
+
+/**
+ * \brief Returns a flag indicating whether the clipboard exists and contains a text string that is non-empty
+ *
+ * \sa SDL_GetClipboardText()
+ */
+extern DECLSPEC SDL_bool SDLCALL SDL_HasClipboardText(void);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_clipboard_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

libs/SDL2/include/SDL_config.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_windows_h_
+#define SDL_config_windows_h_
+#define SDL_config_h_
+
+#include "SDL_platform.h"
+
+/* This is a set of defines to configure the SDL features */
+
+#if !defined(_STDINT_H_) && (!defined(HAVE_STDINT_H) || !_HAVE_STDINT_H)
+#if defined(__GNUC__) || defined(__DMC__) || defined(__WATCOMC__)
+#define HAVE_STDINT_H   1
+#elif defined(_MSC_VER)
+typedef signed __int8 int8_t;
+typedef unsigned __int8 uint8_t;
+typedef signed __int16 int16_t;
+typedef unsigned __int16 uint16_t;
+typedef signed __int32 int32_t;
+typedef unsigned __int32 uint32_t;
+typedef signed __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+#ifndef _UINTPTR_T_DEFINED
+#ifdef  _WIN64
+typedef unsigned __int64 uintptr_t;
+#else
+typedef unsigned int uintptr_t;
+#endif
+#define _UINTPTR_T_DEFINED
+#endif
+/* Older Visual C++ headers don't have the Win64-compatible typedefs... */
+#if ((_MSC_VER <= 1200) && (!defined(DWORD_PTR)))
+#define DWORD_PTR DWORD
+#endif
+#if ((_MSC_VER <= 1200) && (!defined(LONG_PTR)))
+#define LONG_PTR LONG
+#endif
+#else /* !__GNUC__ && !_MSC_VER */
+typedef signed char int8_t;
+typedef unsigned char uint8_t;
+typedef signed short int16_t;
+typedef unsigned short uint16_t;
+typedef signed int int32_t;
+typedef unsigned int uint32_t;
+typedef signed long long int64_t;
+typedef unsigned long long uint64_t;
+#ifndef _SIZE_T_DEFINED_
+#define _SIZE_T_DEFINED_
+typedef unsigned int size_t;
+#endif
+typedef unsigned int uintptr_t;
+#endif /* __GNUC__ || _MSC_VER */
+#endif /* !_STDINT_H_ && !HAVE_STDINT_H */
+
+#ifdef _WIN64
+# define SIZEOF_VOIDP 8
+#else
+# define SIZEOF_VOIDP 4
+#endif
+
+#define HAVE_DDRAW_H 1
+#define HAVE_DINPUT_H 1
+#define HAVE_DSOUND_H 1
+#define HAVE_DXGI_H 1
+#define HAVE_XINPUT_H 1
+#define HAVE_MMDEVICEAPI_H 1
+#define HAVE_AUDIOCLIENT_H 1
+#define HAVE_ENDPOINTVOLUME_H 1
+
+/* This is disabled by default to avoid C runtime dependencies and manifest requirements */
+#ifdef HAVE_LIBC
+/* Useful headers */
+#define STDC_HEADERS 1
+#define HAVE_CTYPE_H 1
+#define HAVE_FLOAT_H 1
+#define HAVE_LIMITS_H 1
+#define HAVE_MATH_H 1
+#define HAVE_SIGNAL_H 1
+#define HAVE_STDIO_H 1
+#define HAVE_STRING_H 1
+
+/* C library functions */
+#define HAVE_MALLOC 1
+#define HAVE_CALLOC 1
+#define HAVE_REALLOC 1
+#define HAVE_FREE 1
+#define HAVE_ALLOCA 1
+#define HAVE_QSORT 1
+#define HAVE_ABS 1
+#define HAVE_MEMSET 1
+#define HAVE_MEMCPY 1
+#define HAVE_MEMMOVE 1
+#define HAVE_MEMCMP 1
+#define HAVE_STRLEN 1
+#define HAVE__STRREV 1
+/* These functions have security warnings, so we won't use them */
+/* #undef HAVE__STRUPR */
+/* #undef HAVE__STRLWR */
+#define HAVE_STRCHR 1
+#define HAVE_STRRCHR 1
+#define HAVE_STRSTR 1
+/* These functions have security warnings, so we won't use them */
+/* #undef HAVE__LTOA */
+/* #undef HAVE__ULTOA */
+#define HAVE_STRTOL 1
+#define HAVE_STRTOUL 1
+#define HAVE_STRTOD 1
+#define HAVE_ATOI 1
+#define HAVE_ATOF 1
+#define HAVE_STRCMP 1
+#define HAVE_STRNCMP 1
+#define HAVE__STRICMP 1
+#define HAVE__STRNICMP 1
+#define HAVE_ACOS   1
+#define HAVE_ACOSF  1
+#define HAVE_ASIN   1
+#define HAVE_ASINF  1
+#define HAVE_ATAN   1
+#define HAVE_ATANF  1
+#define HAVE_ATAN2  1
+#define HAVE_ATAN2F 1
+#define HAVE_CEILF  1
+#define HAVE__COPYSIGN  1
+#define HAVE_COS    1
+#define HAVE_COSF   1
+#define HAVE_EXP    1
+#define HAVE_EXPF   1
+#define HAVE_FABS   1
+#define HAVE_FABSF  1
+#define HAVE_FLOOR  1
+#define HAVE_FLOORF 1
+#define HAVE_FMOD   1
+#define HAVE_FMODF  1
+#define HAVE_LOG    1
+#define HAVE_LOGF   1
+#define HAVE_LOG10  1
+#define HAVE_LOG10F 1
+#define HAVE_POW    1
+#define HAVE_POWF   1
+#define HAVE_SIN    1
+#define HAVE_SINF   1
+#define HAVE_SQRT   1
+#define HAVE_SQRTF  1
+#define HAVE_TAN    1
+#define HAVE_TANF   1
+#if defined(_MSC_VER)
+/* These functions were added with the VC++ 2013 C runtime library */
+#if _MSC_VER >= 1800
+#define HAVE_STRTOLL 1
+#define HAVE_VSSCANF 1
+#define HAVE_SCALBN 1
+#define HAVE_SCALBNF    1
+#endif
+/* This function is available with at least the VC++ 2008 C runtime library */
+#if _MSC_VER >= 1400
+#define HAVE__FSEEKI64 1
+#endif
+#endif
+#if !defined(_MSC_VER) || defined(_USE_MATH_DEFINES)
+#define HAVE_M_PI 1
+#endif
+#else
+#define HAVE_STDARG_H   1
+#define HAVE_STDDEF_H   1
+#endif
+
+/* Enable various audio drivers */
+#define SDL_AUDIO_DRIVER_WASAPI 1
+#define SDL_AUDIO_DRIVER_DSOUND 1
+#define SDL_AUDIO_DRIVER_WINMM  1
+#define SDL_AUDIO_DRIVER_DISK   1
+#define SDL_AUDIO_DRIVER_DUMMY  1
+
+/* Enable various input drivers */
+#define SDL_JOYSTICK_DINPUT 1
+#define SDL_JOYSTICK_XINPUT 1
+#define SDL_JOYSTICK_HIDAPI 1
+#define SDL_HAPTIC_DINPUT   1
+#define SDL_HAPTIC_XINPUT   1
+
+/* Enable the dummy sensor driver */
+#define SDL_SENSOR_DUMMY  1
+
+/* Enable various shared object loading systems */
+#define SDL_LOADSO_WINDOWS  1
+
+/* Enable various threading systems */
+#define SDL_THREAD_WINDOWS  1
+
+/* Enable various timer systems */
+#define SDL_TIMER_WINDOWS   1
+
+/* Enable various video drivers */
+#define SDL_VIDEO_DRIVER_DUMMY  1
+#define SDL_VIDEO_DRIVER_WINDOWS    1
+
+#ifndef SDL_VIDEO_RENDER_D3D
+#define SDL_VIDEO_RENDER_D3D    1
+#endif
+#ifndef SDL_VIDEO_RENDER_D3D11
+#define SDL_VIDEO_RENDER_D3D11  0
+#endif
+
+/* Enable OpenGL support */
+#ifndef SDL_VIDEO_OPENGL
+#define SDL_VIDEO_OPENGL    1
+#endif
+#ifndef SDL_VIDEO_OPENGL_WGL
+#define SDL_VIDEO_OPENGL_WGL    1
+#endif
+#ifndef SDL_VIDEO_RENDER_OGL
+#define SDL_VIDEO_RENDER_OGL    1
+#endif
+#ifndef SDL_VIDEO_RENDER_OGL_ES2
+#define SDL_VIDEO_RENDER_OGL_ES2    1
+#endif
+#ifndef SDL_VIDEO_OPENGL_ES2
+#define SDL_VIDEO_OPENGL_ES2    1
+#endif
+#ifndef SDL_VIDEO_OPENGL_EGL
+#define SDL_VIDEO_OPENGL_EGL    1
+#endif
+
+/* Enable Vulkan support */
+#define SDL_VIDEO_VULKAN 1
+
+/* Enable system power support */
+#define SDL_POWER_WINDOWS 1
+
+/* Enable filesystem support */
+#define SDL_FILESYSTEM_WINDOWS  1
+
+/* Enable assembly routines (Win64 doesn't have inline asm) */
+#ifndef _WIN64
+#define SDL_ASSEMBLY_ROUTINES   1
+#endif
+
+#endif /* SDL_config_windows_h_ */

libs/SDL2/include/SDL_config.h.cmake

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_h_
+#define SDL_config_h_
+
+/**
+ *  \file SDL_config.h.in
+ *
+ *  This is a set of defines to configure the SDL features
+ */
+
+/* General platform specific identifiers */
+#include "SDL_platform.h"
+
+/* C language features */
+#cmakedefine const @HAVE_CONST@
+#cmakedefine inline @HAVE_INLINE@
+#cmakedefine volatile @HAVE_VOLATILE@
+
+/* C datatypes */
+/* Define SIZEOF_VOIDP for 64/32 architectures */
+#ifdef __LP64__
+#define SIZEOF_VOIDP 8
+#else
+#define SIZEOF_VOIDP 4
+#endif
+
+#cmakedefine HAVE_GCC_ATOMICS @HAVE_GCC_ATOMICS@
+#cmakedefine HAVE_GCC_SYNC_LOCK_TEST_AND_SET @HAVE_GCC_SYNC_LOCK_TEST_AND_SET@
+
+#cmakedefine HAVE_D3D_H @HAVE_D3D_H@
+#cmakedefine HAVE_D3D11_H @HAVE_D3D11_H@
+#cmakedefine HAVE_DDRAW_H @HAVE_DDRAW_H@
+#cmakedefine HAVE_DSOUND_H @HAVE_DSOUND_H@
+#cmakedefine HAVE_DINPUT_H @HAVE_DINPUT_H@
+#cmakedefine HAVE_XAUDIO2_H @HAVE_XAUDIO2_H@
+#cmakedefine HAVE_XINPUT_H @HAVE_XINPUT_H@
+#cmakedefine HAVE_DXGI_H @HAVE_DXGI_H@
+#cmakedefine HAVE_XINPUT_GAMEPAD_EX @HAVE_XINPUT_GAMEPAD_EX@
+#cmakedefine HAVE_XINPUT_STATE_EX @HAVE_XINPUT_STATE_EX@
+
+/* Comment this if you want to build without any C library requirements */
+#cmakedefine HAVE_LIBC 1
+#if HAVE_LIBC
+
+/* Useful headers */
+#cmakedefine HAVE_ALLOCA_H 1
+#cmakedefine HAVE_SYS_TYPES_H 1
+#cmakedefine HAVE_STDIO_H 1
+#cmakedefine STDC_HEADERS 1
+#cmakedefine HAVE_STDLIB_H 1
+#cmakedefine HAVE_STDARG_H 1
+#cmakedefine HAVE_MALLOC_H 1
+#cmakedefine HAVE_MEMORY_H 1
+#cmakedefine HAVE_STRING_H 1
+#cmakedefine HAVE_STRINGS_H 1
+#cmakedefine HAVE_WCHAR_H 1
+#cmakedefine HAVE_INTTYPES_H 1
+#cmakedefine HAVE_STDINT_H 1
+#cmakedefine HAVE_CTYPE_H 1
+#cmakedefine HAVE_MATH_H 1
+#cmakedefine HAVE_ICONV_H 1
+#cmakedefine HAVE_SIGNAL_H 1
+#cmakedefine HAVE_ALTIVEC_H 1
+#cmakedefine HAVE_PTHREAD_NP_H 1
+#cmakedefine HAVE_LIBUDEV_H 1
+#cmakedefine HAVE_DBUS_DBUS_H 1
+#cmakedefine HAVE_IBUS_IBUS_H 1
+#cmakedefine HAVE_FCITX_FRONTEND_H 1
+#cmakedefine HAVE_LIBSAMPLERATE_H 1
+
+/* C library functions */
+#cmakedefine HAVE_MALLOC 1
+#cmakedefine HAVE_CALLOC 1
+#cmakedefine HAVE_REALLOC 1
+#cmakedefine HAVE_FREE 1
+#cmakedefine HAVE_ALLOCA 1
+#ifndef __WIN32__ /* Don't use C runtime versions of these on Windows */
+#cmakedefine HAVE_GETENV 1
+#cmakedefine HAVE_SETENV 1
+#cmakedefine HAVE_PUTENV 1
+#cmakedefine HAVE_UNSETENV 1
+#endif
+#cmakedefine HAVE_QSORT 1
+#cmakedefine HAVE_ABS 1
+#cmakedefine HAVE_BCOPY 1
+#cmakedefine HAVE_MEMSET 1
+#cmakedefine HAVE_MEMCPY 1
+#cmakedefine HAVE_MEMMOVE 1
+#cmakedefine HAVE_MEMCMP 1
+#cmakedefine HAVE_WCSLEN 1
+#cmakedefine HAVE_WCSLCPY 1
+#cmakedefine HAVE_WCSLCAT 1
+#cmakedefine HAVE_WCSCMP 1
+#cmakedefine HAVE_STRLEN 1
+#cmakedefine HAVE_STRLCPY 1
+#cmakedefine HAVE_STRLCAT 1
+#cmakedefine HAVE_STRDUP 1
+#cmakedefine HAVE__STRREV 1
+#cmakedefine HAVE__STRUPR 1
+#cmakedefine HAVE__STRLWR 1
+#cmakedefine HAVE_INDEX 1
+#cmakedefine HAVE_RINDEX 1
+#cmakedefine HAVE_STRCHR 1
+#cmakedefine HAVE_STRRCHR 1
+#cmakedefine HAVE_STRSTR 1
+#cmakedefine HAVE_ITOA 1
+#cmakedefine HAVE__LTOA 1
+#cmakedefine HAVE__UITOA 1
+#cmakedefine HAVE__ULTOA 1
+#cmakedefine HAVE_STRTOL 1
+#cmakedefine HAVE_STRTOUL 1
+#cmakedefine HAVE__I64TOA 1
+#cmakedefine HAVE__UI64TOA 1
+#cmakedefine HAVE_STRTOLL 1
+#cmakedefine HAVE_STRTOULL 1
+#cmakedefine HAVE_STRTOD 1
+#cmakedefine HAVE_ATOI 1
+#cmakedefine HAVE_ATOF 1
+#cmakedefine HAVE_STRCMP 1
+#cmakedefine HAVE_STRNCMP 1
+#cmakedefine HAVE__STRICMP 1
+#cmakedefine HAVE_STRCASECMP 1
+#cmakedefine HAVE__STRNICMP 1
+#cmakedefine HAVE_STRNCASECMP 1
+#cmakedefine HAVE_VSSCANF 1
+#cmakedefine HAVE_VSNPRINTF 1
+#cmakedefine HAVE_M_PI 1
+#cmakedefine HAVE_ATAN 1
+#cmakedefine HAVE_ATAN2 1
+#cmakedefine HAVE_ACOS 1
+#cmakedefine HAVE_ASIN 1
+#cmakedefine HAVE_CEIL 1
+#cmakedefine HAVE_COPYSIGN 1
+#cmakedefine HAVE_COS 1
+#cmakedefine HAVE_COSF 1
+#cmakedefine HAVE_FABS 1
+#cmakedefine HAVE_FLOOR 1
+#cmakedefine HAVE_LOG 1
+#cmakedefine HAVE_POW 1
+#cmakedefine HAVE_SCALBN 1
+#cmakedefine HAVE_SIN 1
+#cmakedefine HAVE_SINF 1
+#cmakedefine HAVE_SQRT 1
+#cmakedefine HAVE_SQRTF 1
+#cmakedefine HAVE_TAN 1
+#cmakedefine HAVE_TANF 1
+#cmakedefine HAVE_FOPEN64 1
+#cmakedefine HAVE_FSEEKO 1
+#cmakedefine HAVE_FSEEKO64 1
+#cmakedefine HAVE_SIGACTION 1
+#cmakedefine HAVE_SA_SIGACTION 1
+#cmakedefine HAVE_SETJMP 1
+#cmakedefine HAVE_NANOSLEEP 1
+#cmakedefine HAVE_SYSCONF 1
+#cmakedefine HAVE_SYSCTLBYNAME 1
+#cmakedefine HAVE_CLOCK_GETTIME 1
+#cmakedefine HAVE_GETPAGESIZE 1
+#cmakedefine HAVE_MPROTECT 1
+#cmakedefine HAVE_ICONV 1
+#cmakedefine HAVE_PTHREAD_SETNAME_NP 1
+#cmakedefine HAVE_PTHREAD_SET_NAME_NP 1
+#cmakedefine HAVE_SEM_TIMEDWAIT 1
+#cmakedefine HAVE_GETAUXVAL 1
+#cmakedefine HAVE_POLL 1
+
+#elif __WIN32__
+#cmakedefine HAVE_STDARG_H 1
+#cmakedefine HAVE_STDDEF_H 1
+#else
+/* We may need some replacement for stdarg.h here */
+#include <stdarg.h>
+#endif /* HAVE_LIBC */
+
+/* SDL internal assertion support */
+#cmakedefine SDL_DEFAULT_ASSERT_LEVEL @SDL_DEFAULT_ASSERT_LEVEL@
+
+/* Allow disabling of core subsystems */
+#cmakedefine SDL_ATOMIC_DISABLED @SDL_ATOMIC_DISABLED@
+#cmakedefine SDL_AUDIO_DISABLED @SDL_AUDIO_DISABLED@
+#cmakedefine SDL_CPUINFO_DISABLED @SDL_CPUINFO_DISABLED@
+#cmakedefine SDL_EVENTS_DISABLED @SDL_EVENTS_DISABLED@
+#cmakedefine SDL_FILE_DISABLED @SDL_FILE_DISABLED@
+#cmakedefine SDL_JOYSTICK_DISABLED @SDL_JOYSTICK_DISABLED@
+#cmakedefine SDL_HAPTIC_DISABLED @SDL_HAPTIC_DISABLED@
+#cmakedefine SDL_LOADSO_DISABLED @SDL_LOADSO_DISABLED@
+#cmakedefine SDL_RENDER_DISABLED @SDL_RENDER_DISABLED@
+#cmakedefine SDL_THREADS_DISABLED @SDL_THREADS_DISABLED@
+#cmakedefine SDL_TIMERS_DISABLED @SDL_TIMERS_DISABLED@
+#cmakedefine SDL_VIDEO_DISABLED @SDL_VIDEO_DISABLED@
+#cmakedefine SDL_POWER_DISABLED @SDL_POWER_DISABLED@
+#cmakedefine SDL_FILESYSTEM_DISABLED @SDL_FILESYSTEM_DISABLED@
+
+/* Enable various audio drivers */
+#cmakedefine SDL_AUDIO_DRIVER_ALSA @SDL_AUDIO_DRIVER_ALSA@
+#cmakedefine SDL_AUDIO_DRIVER_ALSA_DYNAMIC @SDL_AUDIO_DRIVER_ALSA_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_ANDROID @SDL_AUDIO_DRIVER_ANDROID@
+#cmakedefine SDL_AUDIO_DRIVER_ARTS @SDL_AUDIO_DRIVER_ARTS@
+#cmakedefine SDL_AUDIO_DRIVER_ARTS_DYNAMIC @SDL_AUDIO_DRIVER_ARTS_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_COREAUDIO @SDL_AUDIO_DRIVER_COREAUDIO@
+#cmakedefine SDL_AUDIO_DRIVER_DISK @SDL_AUDIO_DRIVER_DISK@
+#cmakedefine SDL_AUDIO_DRIVER_DSOUND @SDL_AUDIO_DRIVER_DSOUND@
+#cmakedefine SDL_AUDIO_DRIVER_DUMMY @SDL_AUDIO_DRIVER_DUMMY@
+#cmakedefine SDL_AUDIO_DRIVER_EMSCRIPTEN @SDL_AUDIO_DRIVER_EMSCRIPTEN@
+#cmakedefine SDL_AUDIO_DRIVER_ESD @SDL_AUDIO_DRIVER_ESD@
+#cmakedefine SDL_AUDIO_DRIVER_ESD_DYNAMIC @SDL_AUDIO_DRIVER_ESD_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_FUSIONSOUND @SDL_AUDIO_DRIVER_FUSIONSOUND@
+#cmakedefine SDL_AUDIO_DRIVER_FUSIONSOUND_DYNAMIC @SDL_AUDIO_DRIVER_FUSIONSOUND_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_HAIKU @SDL_AUDIO_DRIVER_HAIKU@
+#cmakedefine SDL_AUDIO_DRIVER_JACK @SDL_AUDIO_DRIVER_JACK@
+#cmakedefine SDL_AUDIO_DRIVER_JACK_DYNAMIC @SDL_AUDIO_DRIVER_JACK_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_NAS @SDL_AUDIO_DRIVER_NAS@
+#cmakedefine SDL_AUDIO_DRIVER_NAS_DYNAMIC @SDL_AUDIO_DRIVER_NAS_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_NETBSD @SDL_AUDIO_DRIVER_NETBSD@
+#cmakedefine SDL_AUDIO_DRIVER_OSS @SDL_AUDIO_DRIVER_OSS@
+#cmakedefine SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H @SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H@
+#cmakedefine SDL_AUDIO_DRIVER_PAUDIO @SDL_AUDIO_DRIVER_PAUDIO@
+#cmakedefine SDL_AUDIO_DRIVER_PULSEAUDIO @SDL_AUDIO_DRIVER_PULSEAUDIO@
+#cmakedefine SDL_AUDIO_DRIVER_PULSEAUDIO_DYNAMIC @SDL_AUDIO_DRIVER_PULSEAUDIO_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_QSA @SDL_AUDIO_DRIVER_QSA@
+#cmakedefine SDL_AUDIO_DRIVER_SNDIO @SDL_AUDIO_DRIVER_SNDIO@
+#cmakedefine SDL_AUDIO_DRIVER_SNDIO_DYNAMIC @SDL_AUDIO_DRIVER_SNDIO_DYNAMIC@
+#cmakedefine SDL_AUDIO_DRIVER_SUNAUDIO @SDL_AUDIO_DRIVER_SUNAUDIO@
+#cmakedefine SDL_AUDIO_DRIVER_WASAPI @SDL_AUDIO_DRIVER_WASAPI@
+#cmakedefine SDL_AUDIO_DRIVER_WINMM @SDL_AUDIO_DRIVER_WINMM@
+#cmakedefine SDL_AUDIO_DRIVER_XAUDIO2 @SDL_AUDIO_DRIVER_XAUDIO2@
+
+/* Enable various input drivers */
+#cmakedefine SDL_INPUT_LINUXEV @SDL_INPUT_LINUXEV@
+#cmakedefine SDL_INPUT_LINUXKD @SDL_INPUT_LINUXKD@
+#cmakedefine SDL_INPUT_TSLIB @SDL_INPUT_TSLIB@
+#cmakedefine SDL_JOYSTICK_ANDROID @SDL_JOYSTICK_ANDROID@
+#cmakedefine SDL_JOYSTICK_HAIKU @SDL_JOYSTICK_HAIKU@
+#cmakedefine SDL_JOYSTICK_DINPUT @SDL_JOYSTICK_DINPUT@
+#cmakedefine SDL_JOYSTICK_XINPUT @SDL_JOYSTICK_XINPUT@
+#cmakedefine SDL_JOYSTICK_DUMMY @SDL_JOYSTICK_DUMMY@
+#cmakedefine SDL_JOYSTICK_IOKIT @SDL_JOYSTICK_IOKIT@
+#cmakedefine SDL_JOYSTICK_MFI @SDL_JOYSTICK_MFI@
+#cmakedefine SDL_JOYSTICK_LINUX @SDL_JOYSTICK_LINUX@
+#cmakedefine SDL_JOYSTICK_WINMM @SDL_JOYSTICK_WINMM@
+#cmakedefine SDL_JOYSTICK_USBHID @SDL_JOYSTICK_USBHID@
+#cmakedefine SDL_JOYSTICK_USBHID_MACHINE_JOYSTICK_H @SDL_JOYSTICK_USBHID_MACHINE_JOYSTICK_H@
+#cmakedefine SDL_JOYSTICK_EMSCRIPTEN @SDL_JOYSTICK_EMSCRIPTEN@
+#cmakedefine SDL_HAPTIC_DUMMY @SDL_HAPTIC_DUMMY@
+#cmakedefine SDL_HAPTIC_LINUX @SDL_HAPTIC_LINUX@
+#cmakedefine SDL_HAPTIC_IOKIT @SDL_HAPTIC_IOKIT@
+#cmakedefine SDL_HAPTIC_DINPUT @SDL_HAPTIC_DINPUT@
+#cmakedefine SDL_HAPTIC_XINPUT @SDL_HAPTIC_XINPUT@
+#cmakedefine SDL_HAPTIC_ANDROID @SDL_HAPTIC_ANDROID@
+
+/* Enable various shared object loading systems */
+#cmakedefine SDL_LOADSO_DLOPEN @SDL_LOADSO_DLOPEN@
+#cmakedefine SDL_LOADSO_DUMMY @SDL_LOADSO_DUMMY@
+#cmakedefine SDL_LOADSO_LDG @SDL_LOADSO_LDG@
+#cmakedefine SDL_LOADSO_WINDOWS @SDL_LOADSO_WINDOWS@
+
+/* Enable various threading systems */
+#cmakedefine SDL_THREAD_PTHREAD @SDL_THREAD_PTHREAD@
+#cmakedefine SDL_THREAD_PTHREAD_RECURSIVE_MUTEX @SDL_THREAD_PTHREAD_RECURSIVE_MUTEX@
+#cmakedefine SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP @SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP@
+#cmakedefine SDL_THREAD_WINDOWS @SDL_THREAD_WINDOWS@
+
+/* Enable various timer systems */
+#cmakedefine SDL_TIMER_HAIKU @SDL_TIMER_HAIKU@
+#cmakedefine SDL_TIMER_DUMMY @SDL_TIMER_DUMMY@
+#cmakedefine SDL_TIMER_UNIX @SDL_TIMER_UNIX@
+#cmakedefine SDL_TIMER_WINDOWS @SDL_TIMER_WINDOWS@
+#cmakedefine SDL_TIMER_WINCE @SDL_TIMER_WINCE@
+
+/* Enable various video drivers */
+#cmakedefine SDL_VIDEO_DRIVER_ANDROID @SDL_VIDEO_DRIVER_ANDROID@
+#cmakedefine SDL_VIDEO_DRIVER_HAIKU @SDL_VIDEO_DRIVER_HAIKU@
+#cmakedefine SDL_VIDEO_DRIVER_COCOA @SDL_VIDEO_DRIVER_COCOA@
+#cmakedefine SDL_VIDEO_DRIVER_DIRECTFB @SDL_VIDEO_DRIVER_DIRECTFB@
+#cmakedefine SDL_VIDEO_DRIVER_DIRECTFB_DYNAMIC @SDL_VIDEO_DRIVER_DIRECTFB_DYNAMIC@
+#cmakedefine SDL_VIDEO_DRIVER_DUMMY @SDL_VIDEO_DRIVER_DUMMY@
+#cmakedefine SDL_VIDEO_DRIVER_WINDOWS @SDL_VIDEO_DRIVER_WINDOWS@
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND @SDL_VIDEO_DRIVER_WAYLAND@
+#cmakedefine SDL_VIDEO_DRIVER_RPI @SDL_VIDEO_DRIVER_RPI@
+#cmakedefine SDL_VIDEO_DRIVER_VIVANTE @SDL_VIDEO_DRIVER_VIVANTE@
+#cmakedefine SDL_VIDEO_DRIVER_VIVANTE_VDK @SDL_VIDEO_DRIVER_VIVANTE_VDK@
+
+#cmakedefine SDL_VIDEO_DRIVER_KMSDRM @SDL_VIDEO_DRIVER_KMSDRM@
+#cmakedefine SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC @SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC@
+#cmakedefine SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC_GBM @SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC_GBM@
+
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND_QT_TOUCH @SDL_VIDEO_DRIVER_WAYLAND_QT_TOUCH@
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC @SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC@
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_EGL @SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_EGL@
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_CURSOR @SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_CURSOR@
+#cmakedefine SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_XKBCOMMON @SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_XKBCOMMON@
+
+#cmakedefine SDL_VIDEO_DRIVER_MIR @SDL_VIDEO_DRIVER_MIR@
+#cmakedefine SDL_VIDEO_DRIVER_MIR_DYNAMIC @SDL_VIDEO_DRIVER_MIR_DYNAMIC@
+#cmakedefine SDL_VIDEO_DRIVER_MIR_DYNAMIC_XKBCOMMON @SDL_VIDEO_DRIVER_MIR_DYNAMIC_XKBCOMMON@
+#cmakedefine SDL_VIDEO_DRIVER_EMSCRIPTEN @SDL_VIDEO_DRIVER_EMSCRIPTEN@
+#cmakedefine SDL_VIDEO_DRIVER_X11 @SDL_VIDEO_DRIVER_X11@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC @SDL_VIDEO_DRIVER_X11_DYNAMIC@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT @SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XCURSOR @SDL_VIDEO_DRIVER_X11_DYNAMIC_XCURSOR@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA @SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2 @SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR @SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS @SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS@
+#cmakedefine SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE @SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XCURSOR @SDL_VIDEO_DRIVER_X11_XCURSOR@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XDBE @SDL_VIDEO_DRIVER_X11_XDBE@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XINERAMA @SDL_VIDEO_DRIVER_X11_XINERAMA@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XINPUT2 @SDL_VIDEO_DRIVER_X11_XINPUT2@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XINPUT2_SUPPORTS_MULTITOUCH @SDL_VIDEO_DRIVER_X11_XINPUT2_SUPPORTS_MULTITOUCH@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XRANDR @SDL_VIDEO_DRIVER_X11_XRANDR@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XSCRNSAVER @SDL_VIDEO_DRIVER_X11_XSCRNSAVER@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XSHAPE @SDL_VIDEO_DRIVER_X11_XSHAPE@
+#cmakedefine SDL_VIDEO_DRIVER_X11_XVIDMODE @SDL_VIDEO_DRIVER_X11_XVIDMODE@
+#cmakedefine SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS @SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS@
+#cmakedefine SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY @SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY@
+#cmakedefine SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM @SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM@
+
+#cmakedefine SDL_VIDEO_RENDER_D3D @SDL_VIDEO_RENDER_D3D@
+#cmakedefine SDL_VIDEO_RENDER_D3D11 @SDL_VIDEO_RENDER_D3D11@
+#cmakedefine SDL_VIDEO_RENDER_OGL @SDL_VIDEO_RENDER_OGL@
+#cmakedefine SDL_VIDEO_RENDER_OGL_ES @SDL_VIDEO_RENDER_OGL_ES@
+#cmakedefine SDL_VIDEO_RENDER_OGL_ES2 @SDL_VIDEO_RENDER_OGL_ES2@
+#cmakedefine SDL_VIDEO_RENDER_DIRECTFB @SDL_VIDEO_RENDER_DIRECTFB@
+
+/* Enable OpenGL support */
+#cmakedefine SDL_VIDEO_OPENGL @SDL_VIDEO_OPENGL@
+#cmakedefine SDL_VIDEO_OPENGL_ES @SDL_VIDEO_OPENGL_ES@
+#cmakedefine SDL_VIDEO_OPENGL_ES2 @SDL_VIDEO_OPENGL_ES2@
+#cmakedefine SDL_VIDEO_OPENGL_BGL @SDL_VIDEO_OPENGL_BGL@
+#cmakedefine SDL_VIDEO_OPENGL_CGL @SDL_VIDEO_OPENGL_CGL@
+#cmakedefine SDL_VIDEO_OPENGL_GLX @SDL_VIDEO_OPENGL_GLX@
+#cmakedefine SDL_VIDEO_OPENGL_WGL @SDL_VIDEO_OPENGL_WGL@
+#cmakedefine SDL_VIDEO_OPENGL_EGL @SDL_VIDEO_OPENGL_EGL@
+#cmakedefine SDL_VIDEO_OPENGL_OSMESA @SDL_VIDEO_OPENGL_OSMESA@
+#cmakedefine SDL_VIDEO_OPENGL_OSMESA_DYNAMIC @SDL_VIDEO_OPENGL_OSMESA_DYNAMIC@
+
+/* Enable Vulkan support */
+#cmakedefine SDL_VIDEO_VULKAN @SDL_VIDEO_VULKAN@
+
+/* Enable system power support */
+#cmakedefine SDL_POWER_ANDROID @SDL_POWER_ANDROID@
+#cmakedefine SDL_POWER_LINUX @SDL_POWER_LINUX@
+#cmakedefine SDL_POWER_WINDOWS @SDL_POWER_WINDOWS@
+#cmakedefine SDL_POWER_MACOSX @SDL_POWER_MACOSX@
+#cmakedefine SDL_POWER_HAIKU @SDL_POWER_HAIKU@
+#cmakedefine SDL_POWER_EMSCRIPTEN @SDL_POWER_EMSCRIPTEN@
+#cmakedefine SDL_POWER_HARDWIRED @SDL_POWER_HARDWIRED@
+
+/* Enable system filesystem support */
+#cmakedefine SDL_FILESYSTEM_ANDROID @SDL_FILESYSTEM_ANDROID@
+#cmakedefine SDL_FILESYSTEM_HAIKU @SDL_FILESYSTEM_HAIKU@
+#cmakedefine SDL_FILESYSTEM_COCOA @SDL_FILESYSTEM_COCOA@
+#cmakedefine SDL_FILESYSTEM_DUMMY @SDL_FILESYSTEM_DUMMY@
+#cmakedefine SDL_FILESYSTEM_UNIX @SDL_FILESYSTEM_UNIX@
+#cmakedefine SDL_FILESYSTEM_WINDOWS @SDL_FILESYSTEM_WINDOWS@
+#cmakedefine SDL_FILESYSTEM_EMSCRIPTEN @SDL_FILESYSTEM_EMSCRIPTEN@
+
+/* Enable assembly routines */
+#cmakedefine SDL_ASSEMBLY_ROUTINES @SDL_ASSEMBLY_ROUTINES@
+#cmakedefine SDL_ALTIVEC_BLITTERS @SDL_ALTIVEC_BLITTERS@
+
+/* Enable dynamic libsamplerate support */
+#cmakedefine SDL_LIBSAMPLERATE_DYNAMIC @SDL_LIBSAMPLERATE_DYNAMIC@
+
+/* Platform specific definitions */
+#if !defined(__WIN32__)
+#  if !defined(_STDINT_H_) && !defined(_STDINT_H) && !defined(HAVE_STDINT_H) && !defined(_HAVE_STDINT_H)
+typedef unsigned int size_t;
+typedef signed char int8_t;
+typedef unsigned char uint8_t;
+typedef signed short int16_t;
+typedef unsigned short uint16_t;
+typedef signed int int32_t;
+typedef unsigned int uint32_t;
+typedef signed long long int64_t;
+typedef unsigned long long uint64_t;
+typedef unsigned long uintptr_t;
+#  endif /* if (stdint.h isn't available) */
+#else /* __WIN32__ */
+#  if !defined(_STDINT_H_) && !defined(HAVE_STDINT_H) && !defined(_HAVE_STDINT_H)
+#    if defined(__GNUC__) || defined(__DMC__) || defined(__WATCOMC__)
+#define HAVE_STDINT_H	1
+#    elif defined(_MSC_VER)
+typedef signed __int8 int8_t;
+typedef unsigned __int8 uint8_t;
+typedef signed __int16 int16_t;
+typedef unsigned __int16 uint16_t;
+typedef signed __int32 int32_t;
+typedef unsigned __int32 uint32_t;
+typedef signed __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+#      ifndef _UINTPTR_T_DEFINED
+#        ifdef  _WIN64
+typedef unsigned __int64 uintptr_t;
+#          else
+typedef unsigned int uintptr_t;
+#        endif
+#define _UINTPTR_T_DEFINED
+#      endif
+/* Older Visual C++ headers don't have the Win64-compatible typedefs... */
+#      if ((_MSC_VER <= 1200) && (!defined(DWORD_PTR)))
+#define DWORD_PTR DWORD
+#      endif
+#      if ((_MSC_VER <= 1200) && (!defined(LONG_PTR)))
+#define LONG_PTR LONG
+#      endif
+#    else /* !__GNUC__ && !_MSC_VER */
+typedef signed char int8_t;
+typedef unsigned char uint8_t;
+typedef signed short int16_t;
+typedef unsigned short uint16_t;
+typedef signed int int32_t;
+typedef unsigned int uint32_t;
+typedef signed long long int64_t;
+typedef unsigned long long uint64_t;
+#      ifndef _SIZE_T_DEFINED_
+#define _SIZE_T_DEFINED_
+typedef unsigned int size_t;
+#      endif
+typedef unsigned int uintptr_t;
+#    endif /* __GNUC__ || _MSC_VER */
+#  endif /* !_STDINT_H_ && !HAVE_STDINT_H */
+#endif /* __WIN32__ */
+
+#endif /* SDL_config_h_ */

libs/SDL2/include/SDL_config.h.in

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_h_
+#define SDL_config_h_
+
+/**
+ *  \file SDL_config.h.in
+ *
+ *  This is a set of defines to configure the SDL features
+ */
+
+/* General platform specific identifiers */
+#include "SDL_platform.h"
+
+/* Make sure that this isn't included by Visual C++ */
+#ifdef _MSC_VER
+#error You should run hg revert SDL_config.h 
+#endif
+
+/* C language features */
+#undef const
+#undef inline
+#undef volatile
+
+/* C datatypes */
+#ifdef __LP64__
+#define SIZEOF_VOIDP 8
+#else
+#define SIZEOF_VOIDP 4
+#endif
+#undef HAVE_GCC_ATOMICS
+#undef HAVE_GCC_SYNC_LOCK_TEST_AND_SET
+
+#undef HAVE_DDRAW_H
+#undef HAVE_DINPUT_H
+#undef HAVE_DSOUND_H
+#undef HAVE_DXGI_H
+#undef HAVE_XINPUT_H
+#undef HAVE_XINPUT_GAMEPAD_EX
+#undef HAVE_XINPUT_STATE_EX
+
+/* Comment this if you want to build without any C library requirements */
+#undef HAVE_LIBC
+#if HAVE_LIBC
+
+/* Useful headers */
+#undef HAVE_ALLOCA_H
+#undef HAVE_SYS_TYPES_H
+#undef HAVE_STDIO_H
+#undef STDC_HEADERS
+#undef HAVE_STDLIB_H
+#undef HAVE_STDARG_H
+#undef HAVE_MALLOC_H
+#undef HAVE_MEMORY_H
+#undef HAVE_STRING_H
+#undef HAVE_STRINGS_H
+#undef HAVE_WCHAR_H
+#undef HAVE_INTTYPES_H
+#undef HAVE_STDINT_H
+#undef HAVE_CTYPE_H
+#undef HAVE_MATH_H
+#undef HAVE_ICONV_H
+#undef HAVE_SIGNAL_H
+#undef HAVE_ALTIVEC_H
+#undef HAVE_PTHREAD_NP_H
+#undef HAVE_LIBUDEV_H
+#undef HAVE_DBUS_DBUS_H
+#undef HAVE_IBUS_IBUS_H
+#undef HAVE_FCITX_FRONTEND_H
+#undef HAVE_LIBSAMPLERATE_H
+
+/* C library functions */
+#undef HAVE_MALLOC
+#undef HAVE_CALLOC
+#undef HAVE_REALLOC
+#undef HAVE_FREE
+#undef HAVE_ALLOCA
+#ifndef __WIN32__ /* Don't use C runtime versions of these on Windows */
+#undef HAVE_GETENV
+#undef HAVE_SETENV
+#undef HAVE_PUTENV
+#undef HAVE_UNSETENV
+#endif
+#undef HAVE_QSORT
+#undef HAVE_ABS
+#undef HAVE_BCOPY
+#undef HAVE_MEMSET
+#undef HAVE_MEMCPY
+#undef HAVE_MEMMOVE
+#undef HAVE_MEMCMP
+#undef HAVE_WCSLEN
+#undef HAVE_WCSLCPY
+#undef HAVE_WCSLCAT
+#undef HAVE_WCSCMP
+#undef HAVE_STRLEN
+#undef HAVE_STRLCPY
+#undef HAVE_STRLCAT
+#undef HAVE_STRDUP
+#undef HAVE__STRREV
+#undef HAVE__STRUPR
+#undef HAVE__STRLWR
+#undef HAVE_INDEX
+#undef HAVE_RINDEX
+#undef HAVE_STRCHR
+#undef HAVE_STRRCHR
+#undef HAVE_STRSTR
+#undef HAVE_ITOA
+#undef HAVE__LTOA
+#undef HAVE__UITOA
+#undef HAVE__ULTOA
+#undef HAVE_STRTOL
+#undef HAVE_STRTOUL
+#undef HAVE__I64TOA
+#undef HAVE__UI64TOA
+#undef HAVE_STRTOLL
+#undef HAVE_STRTOULL
+#undef HAVE_STRTOD
+#undef HAVE_ATOI
+#undef HAVE_ATOF
+#undef HAVE_STRCMP
+#undef HAVE_STRNCMP
+#undef HAVE__STRICMP
+#undef HAVE_STRCASECMP
+#undef HAVE__STRNICMP
+#undef HAVE_STRNCASECMP
+#undef HAVE_SSCANF
+#undef HAVE_VSSCANF
+#undef HAVE_SNPRINTF
+#undef HAVE_VSNPRINTF
+#undef HAVE_M_PI
+#undef HAVE_ATAN
+#undef HAVE_ATAN2
+#undef HAVE_ACOS
+#undef HAVE_ASIN
+#undef HAVE_CEIL
+#undef HAVE_COPYSIGN
+#undef HAVE_COS
+#undef HAVE_COSF
+#undef HAVE_FABS
+#undef HAVE_FLOOR
+#undef HAVE_LOG
+#undef HAVE_POW
+#undef HAVE_SCALBN
+#undef HAVE_SIN
+#undef HAVE_SINF
+#undef HAVE_SQRT
+#undef HAVE_SQRTF
+#undef HAVE_TAN
+#undef HAVE_TANF
+#undef HAVE_FOPEN64
+#undef HAVE_FSEEKO
+#undef HAVE_FSEEKO64
+#undef HAVE_SIGACTION
+#undef HAVE_SA_SIGACTION
+#undef HAVE_SETJMP
+#undef HAVE_NANOSLEEP
+#undef HAVE_SYSCONF
+#undef HAVE_SYSCTLBYNAME
+#undef HAVE_CLOCK_GETTIME
+#undef HAVE_GETPAGESIZE
+#undef HAVE_MPROTECT
+#undef HAVE_ICONV
+#undef HAVE_PTHREAD_SETNAME_NP
+#undef HAVE_PTHREAD_SET_NAME_NP
+#undef HAVE_SEM_TIMEDWAIT
+#undef HAVE_GETAUXVAL
+#undef HAVE_POLL
+
+#else
+#define HAVE_STDARG_H   1
+#define HAVE_STDDEF_H   1
+#define HAVE_STDINT_H   1
+#endif /* HAVE_LIBC */
+
+/* SDL internal assertion support */
+#undef SDL_DEFAULT_ASSERT_LEVEL
+
+/* Allow disabling of core subsystems */
+#undef SDL_ATOMIC_DISABLED
+#undef SDL_AUDIO_DISABLED
+#undef SDL_CPUINFO_DISABLED
+#undef SDL_EVENTS_DISABLED
+#undef SDL_FILE_DISABLED
+#undef SDL_JOYSTICK_DISABLED
+#undef SDL_HAPTIC_DISABLED
+#undef SDL_LOADSO_DISABLED
+#undef SDL_RENDER_DISABLED
+#undef SDL_THREADS_DISABLED
+#undef SDL_TIMERS_DISABLED
+#undef SDL_VIDEO_DISABLED
+#undef SDL_POWER_DISABLED
+#undef SDL_FILESYSTEM_DISABLED
+
+/* Enable various audio drivers */
+#undef SDL_AUDIO_DRIVER_ALSA
+#undef SDL_AUDIO_DRIVER_ALSA_DYNAMIC
+#undef SDL_AUDIO_DRIVER_ANDROID
+#undef SDL_AUDIO_DRIVER_ARTS
+#undef SDL_AUDIO_DRIVER_ARTS_DYNAMIC
+#undef SDL_AUDIO_DRIVER_COREAUDIO
+#undef SDL_AUDIO_DRIVER_DISK
+#undef SDL_AUDIO_DRIVER_DSOUND
+#undef SDL_AUDIO_DRIVER_DUMMY
+#undef SDL_AUDIO_DRIVER_EMSCRIPTEN
+#undef SDL_AUDIO_DRIVER_ESD
+#undef SDL_AUDIO_DRIVER_ESD_DYNAMIC
+#undef SDL_AUDIO_DRIVER_FUSIONSOUND
+#undef SDL_AUDIO_DRIVER_FUSIONSOUND_DYNAMIC
+#undef SDL_AUDIO_DRIVER_HAIKU
+#undef SDL_AUDIO_DRIVER_JACK
+#undef SDL_AUDIO_DRIVER_JACK_DYNAMIC
+#undef SDL_AUDIO_DRIVER_NACL
+#undef SDL_AUDIO_DRIVER_NAS
+#undef SDL_AUDIO_DRIVER_NAS_DYNAMIC
+#undef SDL_AUDIO_DRIVER_NETBSD
+#undef SDL_AUDIO_DRIVER_OSS
+#undef SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H
+#undef SDL_AUDIO_DRIVER_PAUDIO
+#undef SDL_AUDIO_DRIVER_PULSEAUDIO
+#undef SDL_AUDIO_DRIVER_PULSEAUDIO_DYNAMIC
+#undef SDL_AUDIO_DRIVER_QSA
+#undef SDL_AUDIO_DRIVER_SNDIO
+#undef SDL_AUDIO_DRIVER_SNDIO_DYNAMIC
+#undef SDL_AUDIO_DRIVER_SUNAUDIO
+#undef SDL_AUDIO_DRIVER_WASAPI
+#undef SDL_AUDIO_DRIVER_WINMM
+#undef SDL_AUDIO_DRIVER_XAUDIO2
+
+/* Enable various input drivers */
+#undef SDL_INPUT_LINUXEV
+#undef SDL_INPUT_LINUXKD
+#undef SDL_INPUT_TSLIB
+#undef SDL_JOYSTICK_HAIKU
+#undef SDL_JOYSTICK_DINPUT
+#undef SDL_JOYSTICK_XINPUT
+#undef SDL_JOYSTICK_DUMMY
+#undef SDL_JOYSTICK_IOKIT
+#undef SDL_JOYSTICK_LINUX
+#undef SDL_JOYSTICK_ANDROID
+#undef SDL_JOYSTICK_WINMM
+#undef SDL_JOYSTICK_USBHID
+#undef SDL_JOYSTICK_USBHID_MACHINE_JOYSTICK_H
+#undef SDL_JOYSTICK_EMSCRIPTEN
+#undef SDL_HAPTIC_DUMMY
+#undef SDL_HAPTIC_LINUX
+#undef SDL_HAPTIC_IOKIT
+#undef SDL_HAPTIC_DINPUT
+#undef SDL_HAPTIC_XINPUT
+
+/* Enable various shared object loading systems */
+#undef SDL_LOADSO_DLOPEN
+#undef SDL_LOADSO_DUMMY
+#undef SDL_LOADSO_LDG
+#undef SDL_LOADSO_WINDOWS
+
+/* Enable various threading systems */
+#undef SDL_THREAD_PTHREAD
+#undef SDL_THREAD_PTHREAD_RECURSIVE_MUTEX
+#undef SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP
+#undef SDL_THREAD_WINDOWS
+
+/* Enable various timer systems */
+#undef SDL_TIMER_HAIKU
+#undef SDL_TIMER_DUMMY
+#undef SDL_TIMER_UNIX
+#undef SDL_TIMER_WINDOWS
+
+/* Enable various video drivers */
+#undef SDL_VIDEO_DRIVER_HAIKU
+#undef SDL_VIDEO_DRIVER_COCOA
+#undef SDL_VIDEO_DRIVER_DIRECTFB
+#undef SDL_VIDEO_DRIVER_DIRECTFB_DYNAMIC
+#undef SDL_VIDEO_DRIVER_DUMMY
+#undef SDL_VIDEO_DRIVER_WINDOWS
+#undef SDL_VIDEO_DRIVER_WAYLAND
+#undef SDL_VIDEO_DRIVER_WAYLAND_QT_TOUCH
+#undef SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC
+#undef SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_EGL
+#undef SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_CURSOR
+#undef SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC_XKBCOMMON
+#undef SDL_VIDEO_DRIVER_MIR
+#undef SDL_VIDEO_DRIVER_MIR_DYNAMIC
+#undef SDL_VIDEO_DRIVER_MIR_DYNAMIC_XKBCOMMON
+#undef SDL_VIDEO_DRIVER_X11
+#undef SDL_VIDEO_DRIVER_RPI
+#undef SDL_VIDEO_DRIVER_KMSDRM
+#undef SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC
+#undef SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC_GBM
+#undef SDL_VIDEO_DRIVER_ANDROID
+#undef SDL_VIDEO_DRIVER_EMSCRIPTEN
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XCURSOR
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS
+#undef SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE
+#undef SDL_VIDEO_DRIVER_X11_XCURSOR
+#undef SDL_VIDEO_DRIVER_X11_XDBE
+#undef SDL_VIDEO_DRIVER_X11_XINERAMA
+#undef SDL_VIDEO_DRIVER_X11_XINPUT2
+#undef SDL_VIDEO_DRIVER_X11_XINPUT2_SUPPORTS_MULTITOUCH
+#undef SDL_VIDEO_DRIVER_X11_XRANDR
+#undef SDL_VIDEO_DRIVER_X11_XSCRNSAVER
+#undef SDL_VIDEO_DRIVER_X11_XSHAPE
+#undef SDL_VIDEO_DRIVER_X11_XVIDMODE
+#undef SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS
+#undef SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY
+#undef SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM
+#undef SDL_VIDEO_DRIVER_NACL
+#undef SDL_VIDEO_DRIVER_VIVANTE
+#undef SDL_VIDEO_DRIVER_VIVANTE_VDK
+#undef SDL_VIDEO_DRIVER_QNX
+
+#undef SDL_VIDEO_RENDER_D3D
+#undef SDL_VIDEO_RENDER_D3D11
+#undef SDL_VIDEO_RENDER_OGL
+#undef SDL_VIDEO_RENDER_OGL_ES
+#undef SDL_VIDEO_RENDER_OGL_ES2
+#undef SDL_VIDEO_RENDER_DIRECTFB
+
+/* Enable OpenGL support */
+#undef SDL_VIDEO_OPENGL
+#undef SDL_VIDEO_OPENGL_ES
+#undef SDL_VIDEO_OPENGL_ES2
+#undef SDL_VIDEO_OPENGL_BGL
+#undef SDL_VIDEO_OPENGL_CGL
+#undef SDL_VIDEO_OPENGL_EGL
+#undef SDL_VIDEO_OPENGL_GLX
+#undef SDL_VIDEO_OPENGL_WGL
+#undef SDL_VIDEO_OPENGL_OSMESA
+#undef SDL_VIDEO_OPENGL_OSMESA_DYNAMIC
+
+/* Enable Vulkan support */
+#undef SDL_VIDEO_VULKAN
+
+/* Enable system power support */
+#undef SDL_POWER_LINUX
+#undef SDL_POWER_WINDOWS
+#undef SDL_POWER_MACOSX
+#undef SDL_POWER_HAIKU
+#undef SDL_POWER_ANDROID
+#undef SDL_POWER_EMSCRIPTEN
+#undef SDL_POWER_HARDWIRED
+
+/* Enable system filesystem support */
+#undef SDL_FILESYSTEM_HAIKU
+#undef SDL_FILESYSTEM_COCOA
+#undef SDL_FILESYSTEM_DUMMY
+#undef SDL_FILESYSTEM_UNIX
+#undef SDL_FILESYSTEM_WINDOWS
+#undef SDL_FILESYSTEM_NACL
+#undef SDL_FILESYSTEM_ANDROID
+#undef SDL_FILESYSTEM_EMSCRIPTEN
+
+/* Enable assembly routines */
+#undef SDL_ASSEMBLY_ROUTINES
+#undef SDL_ALTIVEC_BLITTERS
+
+/* Enable ime support */
+#undef SDL_USE_IME
+
+/* Enable dynamic udev support */
+#undef SDL_UDEV_DYNAMIC
+
+/* Enable dynamic libsamplerate support */
+#undef SDL_LIBSAMPLERATE_DYNAMIC
+
+#endif /* SDL_config_h_ */

libs/SDL2/include/SDL_config_android.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_android_h_
+#define SDL_config_android_h_
+#define SDL_config_h_
+
+#include "SDL_platform.h"
+
+/**
+ *  \file SDL_config_android.h
+ *
+ *  This is a configuration that can be used to build SDL for Android
+ */
+
+#include <stdarg.h>
+
+#define HAVE_GCC_ATOMICS    1
+
+#define HAVE_ALLOCA_H       1
+#define HAVE_SYS_TYPES_H    1
+#define HAVE_STDIO_H    1
+#define STDC_HEADERS    1
+#define HAVE_STRING_H   1
+#define HAVE_INTTYPES_H 1
+#define HAVE_STDINT_H   1
+#define HAVE_CTYPE_H    1
+#define HAVE_MATH_H 1
+#define HAVE_SIGNAL_H 1
+
+/* C library functions */
+#define HAVE_MALLOC 1
+#define HAVE_CALLOC 1
+#define HAVE_REALLOC    1
+#define HAVE_FREE   1
+#define HAVE_ALLOCA 1
+#define HAVE_GETENV 1
+#define HAVE_SETENV 1
+#define HAVE_PUTENV 1
+#define HAVE_SETENV 1
+#define HAVE_UNSETENV   1
+#define HAVE_QSORT  1
+#define HAVE_ABS    1
+#define HAVE_BCOPY  1
+#define HAVE_MEMSET 1
+#define HAVE_MEMCPY 1
+#define HAVE_MEMMOVE    1
+#define HAVE_MEMCMP 1
+#define HAVE_STRLEN 1
+#define HAVE_STRLCPY    1
+#define HAVE_STRLCAT    1
+#define HAVE_STRDUP 1
+#define HAVE_STRCHR 1
+#define HAVE_STRRCHR    1
+#define HAVE_STRSTR 1
+#define HAVE_STRTOL 1
+#define HAVE_STRTOUL    1
+#define HAVE_STRTOLL    1
+#define HAVE_STRTOULL   1
+#define HAVE_STRTOD 1
+#define HAVE_ATOI   1
+#define HAVE_ATOF 1
+#define HAVE_STRCMP 1
+#define HAVE_STRNCMP    1
+#define HAVE_STRCASECMP 1
+#define HAVE_STRNCASECMP 1
+#define HAVE_VSSCANF 1
+#define HAVE_VSNPRINTF  1
+#define HAVE_M_PI   1
+#define HAVE_ATAN   1
+#define HAVE_ATAN2  1
+#define HAVE_ACOS  1
+#define HAVE_ASIN  1
+#define HAVE_CEIL   1
+#define HAVE_COPYSIGN   1
+#define HAVE_COS    1
+#define HAVE_COSF   1
+#define HAVE_FABS   1
+#define HAVE_FLOOR  1
+#define HAVE_LOG    1
+#define HAVE_POW    1
+#define HAVE_SCALBN 1
+#define HAVE_SIN    1
+#define HAVE_SINF   1
+#define HAVE_SQRT   1
+#define HAVE_SQRTF  1
+#define HAVE_TAN    1
+#define HAVE_TANF   1
+#define HAVE_SIGACTION 1
+#define HAVE_SETJMP 1
+#define HAVE_NANOSLEEP  1
+#define HAVE_SYSCONF    1
+#define HAVE_CLOCK_GETTIME	1
+
+#define SIZEOF_VOIDP 4
+
+/* Enable various audio drivers */
+#define SDL_AUDIO_DRIVER_ANDROID    1
+#define SDL_AUDIO_DRIVER_DUMMY  1
+
+/* Enable various input drivers */
+#define SDL_JOYSTICK_ANDROID    1
+#define SDL_HAPTIC_ANDROID    1
+
+/* Enable various shared object loading systems */
+#define SDL_LOADSO_DLOPEN   1
+
+/* Enable various threading systems */
+#define SDL_THREAD_PTHREAD  1
+#define SDL_THREAD_PTHREAD_RECURSIVE_MUTEX  1
+
+/* Enable various timer systems */
+#define SDL_TIMER_UNIX  1
+
+/* Enable various video drivers */
+#define SDL_VIDEO_DRIVER_ANDROID 1
+
+/* Enable OpenGL ES */
+#define SDL_VIDEO_OPENGL_ES 1
+#define SDL_VIDEO_OPENGL_ES2 1
+#define SDL_VIDEO_OPENGL_EGL 1
+#define SDL_VIDEO_RENDER_OGL_ES 1
+#define SDL_VIDEO_RENDER_OGL_ES2    1
+
+/* Enable Vulkan support */
+/* Android does not support Vulkan in native code using the "armeabi" ABI. */
+#if defined(__ARM_ARCH) && __ARM_ARCH < 7
+#define SDL_VIDEO_VULKAN 0
+#else
+#define SDL_VIDEO_VULKAN 1
+#endif
+
+/* Enable system power support */
+#define SDL_POWER_ANDROID 1
+
+/* Enable the filesystem driver */
+#define SDL_FILESYSTEM_ANDROID   1
+
+#endif /* SDL_config_android_h_ */

libs/SDL2/include/SDL_config_iphoneos.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_iphoneos_h_
+#define SDL_config_iphoneos_h_
+#define SDL_config_h_
+
+#include "SDL_platform.h"
+
+#ifdef __LP64__
+#define SIZEOF_VOIDP 8
+#else
+#define SIZEOF_VOIDP 4
+#endif
+
+#define HAVE_GCC_ATOMICS    1
+
+#define HAVE_ALLOCA_H       1
+#define HAVE_SYS_TYPES_H    1
+#define HAVE_STDIO_H    1
+#define STDC_HEADERS    1
+#define HAVE_STRING_H   1
+#define HAVE_INTTYPES_H 1
+#define HAVE_STDINT_H   1
+#define HAVE_CTYPE_H    1
+#define HAVE_MATH_H 1
+#define HAVE_SIGNAL_H   1
+
+/* C library functions */
+#define HAVE_MALLOC 1
+#define HAVE_CALLOC 1
+#define HAVE_REALLOC    1
+#define HAVE_FREE   1
+#define HAVE_ALLOCA 1
+#define HAVE_GETENV 1
+#define HAVE_SETENV 1
+#define HAVE_PUTENV 1
+#define HAVE_SETENV 1
+#define HAVE_UNSETENV   1
+#define HAVE_QSORT  1
+#define HAVE_ABS    1
+#define HAVE_BCOPY  1
+#define HAVE_MEMSET 1
+#define HAVE_MEMCPY 1
+#define HAVE_MEMMOVE    1
+#define HAVE_MEMCMP 1
+#define HAVE_STRLEN 1
+#define HAVE_STRLCPY    1
+#define HAVE_STRLCAT    1
+#define HAVE_STRDUP 1
+#define HAVE_STRCHR 1
+#define HAVE_STRRCHR    1
+#define HAVE_STRSTR 1
+#define HAVE_STRTOL 1
+#define HAVE_STRTOUL    1
+#define HAVE_STRTOLL    1
+#define HAVE_STRTOULL   1
+#define HAVE_STRTOD 1
+#define HAVE_ATOI   1
+#define HAVE_ATOF   1
+#define HAVE_STRCMP 1
+#define HAVE_STRNCMP    1
+#define HAVE_STRCASECMP 1
+#define HAVE_STRNCASECMP 1
+#define HAVE_VSSCANF 1
+#define HAVE_VSNPRINTF  1
+#define HAVE_M_PI   1
+#define HAVE_ATAN   1
+#define HAVE_ATAN2  1
+#define HAVE_ACOS  1
+#define HAVE_ASIN  1
+#define HAVE_CEIL   1
+#define HAVE_COPYSIGN   1
+#define HAVE_COS    1
+#define HAVE_COSF   1
+#define HAVE_FABS   1
+#define HAVE_FLOOR  1
+#define HAVE_LOG    1
+#define HAVE_POW    1
+#define HAVE_SCALBN 1
+#define HAVE_SIN    1
+#define HAVE_SINF   1
+#define HAVE_SQRT   1
+#define HAVE_SQRTF  1
+#define HAVE_TAN    1
+#define HAVE_TANF   1
+#define HAVE_SIGACTION  1
+#define HAVE_SETJMP 1
+#define HAVE_NANOSLEEP  1
+#define HAVE_SYSCONF    1
+#define HAVE_SYSCTLBYNAME 1
+
+/* enable iPhone version of Core Audio driver */
+#define SDL_AUDIO_DRIVER_COREAUDIO 1
+/* Enable the dummy audio driver (src/audio/dummy/\*.c) */
+#define SDL_AUDIO_DRIVER_DUMMY  1
+
+/* Enable the stub haptic driver (src/haptic/dummy/\*.c) */
+#define SDL_HAPTIC_DUMMY 1
+
+/* Enable MFi joystick support */
+#define SDL_JOYSTICK_MFI 1
+
+/* Enable Unix style SO loading */
+#define SDL_LOADSO_DLOPEN 1
+
+/* Enable various threading systems */
+#define SDL_THREAD_PTHREAD  1
+#define SDL_THREAD_PTHREAD_RECURSIVE_MUTEX  1
+
+/* Enable various timer systems */
+#define SDL_TIMER_UNIX  1
+
+/* Supported video drivers */
+#define SDL_VIDEO_DRIVER_UIKIT  1
+#define SDL_VIDEO_DRIVER_DUMMY  1
+
+/* enable OpenGL ES */
+#define SDL_VIDEO_OPENGL_ES2 1
+#define SDL_VIDEO_OPENGL_ES 1
+#define SDL_VIDEO_RENDER_OGL_ES 1
+#define SDL_VIDEO_RENDER_OGL_ES2    1
+
+/* Enable Vulkan support */
+#if !TARGET_OS_SIMULATOR && !TARGET_CPU_ARM // Only 64-bit devices have Metal
+#define SDL_VIDEO_VULKAN 1
+#else
+#define SDL_VIDEO_VULKAN 0
+#endif
+
+/* Enable system power support */
+#define SDL_POWER_UIKIT 1
+
+/* enable iPhone keyboard support */
+#define SDL_IPHONE_KEYBOARD 1
+
+/* enable iOS extended launch screen */
+#define SDL_IPHONE_LAUNCHSCREEN 1
+
+/* Set max recognized G-force from accelerometer
+   See src/joystick/uikit/SDL_sysjoystick.m for notes on why this is needed
+ */
+#define SDL_IPHONE_MAX_GFORCE 5.0
+
+/* enable filesystem support */
+#define SDL_FILESYSTEM_COCOA   1
+
+#endif /* SDL_config_iphoneos_h_ */

libs/SDL2/include/SDL_config_macosx.h

+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_config_macosx_h_
+#define SDL_config_macosx_h_
+#define SDL_config_h_
+
+#include "SDL_platform.h"
+
+/* This gets us MAC_OS_X_VERSION_MIN_REQUIRED... */
+#include <AvailabilityMacros.h>
+
+/* This is a set of defines to configure the SDL features */
+
+#ifdef __LP64__
+    #define SIZEOF_VOIDP 8
+#else
+    #define SIZEOF_VOIDP 4
+#endif
+
+/* Useful headers */
+#define HAVE_ALLOCA_H       1
+#define HAVE_SYS_TYPES_H    1
+#define HAVE_STDIO_H    1
+#define STDC_HEADERS    1
+#define HAVE_STRING_H   1
+#define HAVE_INTTYPES_H 1
+#define HAVE_STDINT_H   1
+#define HAVE_CTYPE_H    1
+#define HAVE_MATH_H 1
+#define HAVE_SIGNAL_H   1
+
+/* C library functions */
+#define HAVE_MALLOC 1
+#define HAVE_CALLOC 1
+#define HAVE_REALLOC    1
+#define HAVE_FREE   1
+#define HAVE_ALLOCA 1
+#define HAVE_GETENV 1
+#define HAVE_SETENV 1
+#define HAVE_PUTENV 1
+#define HAVE_UNSETENV   1
+#define HAVE_QSORT  1
+#define HAVE_ABS    1
+#define HAVE_BCOPY  1
+#define HAVE_MEMSET 1
+#define HAVE_MEMCPY 1
+#define HAVE_MEMMOVE    1
+#define HAVE_MEMCMP 1
+#define HAVE_STRLEN 1
+#define HAVE_STRLCPY    1
+#define HAVE_STRLCAT    1
+#define HAVE_STRDUP 1
+#define HAVE_STRCHR 1
+#define HAVE_STRRCHR    1
+#define HAVE_STRSTR 1
+#define HAVE_STRTOL 1
+#define HAVE_STRTOUL    1
+#define HAVE_STRTOLL    1
+#define HAVE_STRTOULL   1
+#define HAVE_STRTOD 1
+#define HAVE_ATOI   1
+#define HAVE_ATOF   1
+#define HAVE_STRCMP 1
+#define HAVE_STRNCMP    1
+#define HAVE_STRCASECMP 1
+#define HAVE_STRNCASECMP 1
+#define HAVE_VSSCANF 1
+#define HAVE_VSNPRINTF  1
+#define HAVE_CEIL   1
+#define HAVE_COPYSIGN   1
+#define HAVE_COS    1
+#define HAVE_COSF   1
+#define HAVE_FABS   1
+#define HAVE_FLOOR  1
+#define HAVE_LOG    1
+#define HAVE_POW    1
+#define HAVE_SCALBN 1
+#define HAVE_SIN    1
+#define HAVE_SINF   1
+#define HAVE_SQRT   1
+#define HAVE_SQRTF  1
+#define HAVE_TAN    1
+#define HAVE_TANF   1
+#define HAVE_SIGACTION  1
+#define HAVE_SETJMP 1
+#define HAVE_NANOSLEEP  1
+#define HAVE_SYSCONF    1
+#define HAVE_SYSCTLBYNAME 1
+#define HAVE_ATAN 1
+#define HAVE_ATAN2 1
+#define HAVE_ACOS 1
+#define HAVE_ASIN 1
+
+/* Enable various audio drivers */
+#define SDL_AUDIO_DRIVER_COREAUDIO  1
+#define SDL_AUDIO_DRIVER_DISK   1
+#define SDL_AUDIO_DRIVER_DUMMY  1
+
+/* Enable various input drivers */
+#define SDL_JOYSTICK_IOKIT  1
+#define SDL_HAPTIC_IOKIT    1
+
+/* Enable various shared object loading systems */
+#define SDL_LOADSO_DLOPEN   1
+
+/* Enable various threading systems */
+#define SDL_THREAD_PTHREAD  1
+#define SDL_THREAD_PTHREAD_RECURSIVE_MUTEX  1
+
+/* Enable various timer systems */
+#define SDL_TIMER_UNIX  1
+
+/* Enable various video drivers */
+#define SDL_VIDEO_DRIVER_COCOA  1
+#define SDL_VIDEO_DRIVER_DUMMY  1
+#undef SDL_VIDEO_DRIVER_X11
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC "/usr/X11R6/lib/libX11.6.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT "/usr/X11R6/lib/libXext.6.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA "/usr/X11R6/lib/libXinerama.1.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2 "/usr/X11R6/lib/libXi.6.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR "/usr/X11R6/lib/libXrandr.2.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS "/usr/X11R6/lib/libXss.1.dylib"
+#define SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE "/usr/X11R6/lib/libXxf86vm.1.dylib"
+#define SDL_VIDEO_DRIVER_X11_XDBE 1
+#define SDL_VIDEO_DRIVER_X11_XINERAMA 1
+#define SDL_VIDEO_DRIVER_X11_XRANDR 1
+#define SDL_VIDEO_DRIVER_X11_XSCRNSAVER 1
+#define SDL_VIDEO_DRIVER_X11_XSHAPE 1
+#define SDL_VIDEO_DRIVER_X11_XVIDMODE 1
+#define SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM 1
+
+#ifdef MAC_OS_X_VERSION_10_8
+/*
+ * No matter the versions targeted, this is the 10.8 or later SDK, so you have
+ *  to use the external Xquartz, which is a more modern Xlib. Previous SDKs
+ *  used an older Xlib.
+ */
+#define SDL_VIDEO_DRIVER_X11_XINPUT2 1
+#define SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS 1
+#define SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY 1
+#endif
+
+#ifndef SDL_VIDEO_RENDER_OGL
+#define SDL_VIDEO_RENDER_OGL    1
+#endif
+
+/* Enable OpenGL support */
+#ifndef SDL_VIDEO_OPENGL
+#define SDL_VIDEO_OPENGL    1
+#endif
+#ifndef SDL_VIDEO_OPENGL_CGL
+#define SDL_VIDEO_OPENGL_CGL    1
+#endif
+#ifndef SDL_VIDEO_OPENGL_GLX
+#define SDL_VIDEO_OPENGL_GLX    1
+#endif
+
+/* Enable Vulkan support */
+/* Metal/MoltenVK/Vulkan only supported on 64-bit architectures with 10.11+ */
+#if TARGET_CPU_X86_64 && (MAC_OS_X_VERSION_MAX_ALLOWED >= 101100)
+#define SDL_VIDEO_VULKAN 1
+#else
+#define  SDL_VIDEO_VULKAN 0
+#endif
+
+/* Enable system power support */
+#define SDL_POWER_MACOSX 1
+
+/* enable filesystem support */
+#define SDL_FILESYSTEM_COCOA   1
+
+/* Enable assembly routines */
+#define SDL_ASSEMBLY_ROUTINES   1
+#ifdef __ppc__
+#define SDL_ALTIVEC_BLITTERS    1
+#endif
+
+#endif /* SDL_config_macosx_h_ */