cpdebug.mk

@@ -3,12 +3,12 @@ ifdef ComSpec
 COMSPEC=$(ComSpec)
 endif
 ifdef COMSPEC
-OBJCOPY=objcopy.exe
-OBJDUMP=objdump.exe
+OBJCOPY?=objcopy.exe
+OBJDUMP?=objdump.exe
 GZIP?=gzip.exe
 else
-OBJCOPY=objcopy
-OBJDUMP=objdump
+OBJCOPY?=objcopy
+OBJDUMP?=objdump
 GZIP?=gzip
 endif
 DBGNAME=$(BIN).debug

debian-template/control

@@ -11,6 +11,7 @@ Build-Depends: debhelper (>= 7.0.50~),
  zlib1g-dev,
  libgme-dev,
  libopenmpt-dev,
+ libcurl4-openssl-dev,
  libglu1-dev | libglu-dev,
  libosmesa6-dev | libgl-dev,
  nasm [i386]

debian-template/copyright

@@ -12,7 +12,7 @@ Upstream Author(s):
 
 Copyright:
 
-    Copyright (C) 1998-2018 by Sonic Team Junior
+    Copyright (C) 1998-2025 by Sonic Team Junior
 
 License:
 
@@ -21,7 +21,7 @@ License:
 The Debian packaging is:
 
     Copyright (C) 2010 Callum Dickinson <gcfreak_ag20@hotmail.com>
-    Copyright (C) 2010-2018 by Sonic Team Junior <stjr@srb2.org>
+    Copyright (C) 2010-2025 by Sonic Team Junior <stjr@srb2.org>
 
 and is licensed under the GPL version 2,
 see "/usr/share/common-licenses/GPL-2".

debian-template/rules

@@ -78,7 +78,7 @@ NONX86	= $(shell test "`echo $(CROSS_COMPILE_HOST) | grep 'i[3-6]86'`" || echo "
 MAKEARGS = $(OS) $(NONX86) $(PREFIX) EXENAME=$(EXENAME) DBGNAME=$(DBGNAME) NOOBJDUMP=1 # SDL_PKGCONFIG=sdl2 PNG_PKGCONFIG=libpng
 MENUFILE1 = ?package($(PACKAGE)):needs="X11" section="$(SECTION)"
 MENUFILE2 = title="$(TITLE)" command="/$(PKGDIR)/$(PACKAGE)"
-BINDIR :=  $(DIR)/bin/Linux/Release
+BINDIR :=  $(DIR)/bin/
 
 # FIXME pkg-config dir hacks
 # Launchpad doesn't need this; it actually makes i386 builds fail due to cross-compile

doc/Doublescan.txt

-   ================================================================
-   How to add Low-res modes to your XF86Config under Linux MANUALLY
-   ================================================================
-
-   I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR EQUIPMENT!!!
-
-   This document explains how to add low-res modes like 320x200 to your
-   X-Server configuration, because some new setup tools for the X-Server
-   do not support this. ONLY RECOMMENDED FOR USERS WHO KNOW WHAT THEY DO!
-
-   I do not take any responsibility for damage done to your monitor, your
-   videocard, your harddisk, your cat, your dog or anything else!!!
-   IMPORTANT IS, THAT YOUR "HorizSync" AND "VertRefresh" VALUES REALLY
-   MATCH YOUR MONITOR! OTHERWISE YOUR MONITOR CAN BLOW UP!!!
-
-   OK, if you have read up to here, you either know what you do or really
-   die-hard want those low-res modes. Here is what to do:
-   Look up your XF86Config. Is is either in /etc or in /etc/X11. Here is
-   what you have to add to the definition of your modeslines:
-
-# Low-res Doublescan modes
-# If your chipset does not support doublescan, you get a 'squashed'
-# resolution like 320x400.
-
-# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
-Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
-# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
-Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
-# 320x240 @ 72 Hz, 36.5 kHz hsync
-Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
-# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
-ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
-# 400x300 @ 60 Hz, 37.8 kHz hsync
-Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
-# 400x300 @ 72 Hz, 48.0 kHz hsync
-Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
-
-   If your video card only supports a specific set of discrete dotclocks
-   (RAMDAC) you may have to replace the dotclocks given here by one of the
-   specified (e.g in the first modeline the dotclock is 12.588 MHz). I believe
-   that nowadays all cards and monitors should work with these settings, but
-   if you have outdated hardware you better check the frequencies yourself. If
-   there is any uncertainty, please check the "XFree86 Video Timings HOWTO".
-
-
-   Then have a look at the section "Screen" with the appropriate driver
-   (usually either "svga" or "accel"). Under Subsection "Display" there
-   are modes for the given color depth. Add the desired modes. As an
-   example I give you my screens definition here with low-res modes in
-   16 bit color depth:
-
-Section "Screen"
-    Driver      "accel"
-    Device      "3D Charger"
-    Monitor     "Iiyama Pro 450"
-    DefaultColorDepth 16
-
-    Subsection "Display"
-        Depth       8
-        Modes       "1280x1024" "1024x768" "800x600" "640x480"
-        ViewPort    0 0
-        Virtual     1280 1024
-    EndSubsection
-    Subsection "Display"
-        Depth       16
-        Modes       "1152x864" "1024x768" "800x600" "640x480" "400x300" "320x200" <- THIS IS ACTUALLY WHAT YOU WANT!!!
-        ViewPort    0 0                                       ^^^^^^^^^^^^^^^^^^^
-        Virtual     1152 864
-    EndSubsection
-    Subsection "Display"
-        Depth       24
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-        Virtual     800 600
-    EndSubsection
-    Subsection "Display"
-        Depth       32
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-        Virtual     800 600
-    EndSubsection
-EndSection
-
-   Once again: important is, that you edit the correct Screen section.
-   If you use the SVGA Server and edit the ACCEL Server, you might
-   wonder where your new modes have gone.
-
-   If everything went fine and you want to say thank you, just write
-   to "metzgermeister@users.sourceforge.net". If your monitor blew
-   up and you want to kill me, find me playing Legacy or Q3A on the net
-   and frag me (with your second monitor, hehe).
-
-   - metzgermeister

doc/Item Ranges.txt

-1-99 : Player Starts
-	1 - Player 1 Start		1
-	2 - Player 2 Start		2
-	3 - Player 3 Start		3
-	4 - Player 4 Start		4
-	5 - Player 5 Start 		4001
-	6 - Player 6 Start 		4002
-	7 - Player 7 Start 		4003
-	8 - Player 8 Start 		4004
-	9 - Player 9 Start 		4005
-	10 - Player 10 Start 		4006
-	11 - Player 11 Start 		4007
-	12 - Player 12 Start 		4008
-	13 - Player 13 Start 		4009
-	14 - Player 14 Start 		4010
-	15 - Player 15 Start 		4011
-	16 - Player 16 Start 		4012
-	17 - Player 17 Start 		4013
-	18 - Player 18 Start 		4014
-	19 - Player 19 Start 		4015
-	20 - Player 20 Start 		4016
-	21 - Player 21 Start 		4017
-	22 - Player 22 Start 		4018
-	23 - Player 23 Start 		4019
-	24 - Player 24 Start 		4020
-	25 - Player 25 Start 		4021
-	26 - Player 26 Start 		4022
-	27 - Player 27 Start 		4023
-	28 - Player 28 Start 		4024
-	29 - Player 29 Start 		4025
-	30 - Player 30 Start 		4026
-	31 - Player 31 Start 		4027
-	32 - Player 32 Start 		4028
-	33 - Player Match Start 	11
-	34 - Red Team Start 		87
-	35 - Blue Team Start 		89
-	36 - Tag start			New
-
-100 - 199 : Enemies
-	100 - Blue Crawla		3004
-	101 - Red Crawla		9
-	102 - GFZ Fish			58
-	103 - Gold Buzz			5005
-	104 - Red Buzz			5006
-	105 - Jetty-Syn Bomber		3005
-	106 - Jetty-Syn Gunner		22
-	107 - Crawla Commander		21
-	108 - Deton			71
-	109 - Skim			56
-	110 - THZ Turret		2004
-	111 - Pop-up Turret		42
-
-200 - 299 : Bosses and their associated items (if any)
-	200 - Boss 1			16
-	201 - Boss 2			2008
-	290 - Boss Fly Point		17
-	291 - EggTrap Center		2049
-
-300 - 399 : Collectibles
-	300 - Ring			2014
-	301 - Homing Ring		69
-	302 - Rail Ring			3003
-	303 - Infinity Ring		80
-	304 - Automatic Ring		26
-	305 - Explosion Ring		54
-	306 - Red CTF Flag		31
-	307 - Blue CTF Flag		34
-	308 - Special Stage Token	2013
-	309 - Emerald 1			420
-	310 - Emerald 2			421
-	311 - Emerald 3			422
-	312 - Emerald 4			423
-	313 - Emerald 5			424
-	314 - Emerald 6			425
-	315 - Emerald 7			426
-	316 - Hunting Emerald 1		64
-	317 - Hunting Emerald 2		3002
-	318 - Hunting Emerald 3		3001
-
-400 - 499 : Boxes
-	400 - Super Ring Box		2011
-	401 - Grey Ring Box		2012
-	402 - Ring Shield Box		48
-	403 - Fire Shield Box		2002
-	404 - Bomb Shield Box		2018
-	405 - Jump Shield Box		35
-	406 - Water Shield Box		2028
-	407 - Sneaker Box		25
-	408 - Invincibility Box		2022
-	409 - 1-Up Box			41
-	410 - Eggman Box		2005
-	411 - Mixup Box			78
-	412 - Question Box		3000
-
-500 - 599 : Interactive Objects (friendly or otherwise - includes springs)
-	500 - Bubble Patch		33
-	501 - Level End Sign		86
-	502 - Starpost			3006
-	520 - Spike Ball		-1
-	521 - Special Stage Spike Ball	23
-	522 - Ceiling Spike		67
-	523 - Floor Spike		68
-	540 - Fan			32
-	541 - Steam Riser		30
-	550 - Yellow Spring		28
-	551 - Red Spring		79
-	552 - Blue Spring		5004
-	553 - Yellow Spring Down	65
-	554 - Red Spring Down		66
-	555 - Yellow Diagonal Spring	2015
-	556 - Red Diagonal Spring	38
-	557 - Yellow Diag Spring Down	20
-	558 - Red Diag Spring Down	39
-
-600 - 699 : Special placement patterns
-	600 - Vertical Rigns - Stack of 5 (suitable for Yellow Spring)	84
-	601 - Vertical Rings - Stack of 5 (suitable for Red Spring)	44
-	602 - Diagonal rings (5)					76
-	603 - Diagonal rings (10)					77
-	604 - A ring of rings						47
-	605 - A BIGGER ring of rings					2007
-	606 - A ring of wing items					2048
-	607 - A BIGGER ring of wing items				2010
-	608 - A ring of rings and wings (alternating)			2046
-	609 - A BIGGER ring of rings and wings (alternating)		2047
-
-700 - 799 : Powerup indicators/environmental effects/miscellany
-	700 - Ambient Water 1a (S)	2026
-	701 - Ambient Water 1b (S)	2024
-	702 - Ambient Water 2a (M)	2023
-	703 - Ambient Water 2b (M)	2045
-	704 - Ambient Water 3a (L)	83
-	705 - Ambient Water 3b (L)	2019
-	706 - Ambient Water 4a (XL)	2025
-	707 - Ambient Water 4b (XL)	27
-	708 - Random Ambient 1		14
-	709 - Random Ambient 2		43
-	750 - Chaos Spawner		8
-	751 - Teleport Point		5003
-	752 - Alternate View Point	5007
-	753 - Zoom Tube Waypoint	18
-	754 - Pusher			5001
-	755 - Puller			5002
-	756 - Street Light		2003
-	
-800 - 899 : Greenflower Scenery
-	800 - Flower 1			36
-	801 - Flower 2			70
-	802 - Flower 3			73
-	804 - Berry Bush		74
-	805 - Bush			75
-
-900 - 999 : Techno Hill Scenery
-	900 - THZ Plant			2035
-	901 - Alarm			2006
-
-1000 - 1099 : Deep Sea Scenery
-	1000 - Gargoyle			81
-
-1100 - 1199 : Castle Eggman Scenery
-	1100 - Ceiling Chain		49
-	1101 - Torch Flame		24
-	1102 - Eggman Statue		52
-	1103 - CEZ Flower		2001
-
-1200 - 1299 : Arid Canyon Scenery
-1300 - 1399 : Red Volcano Scenery
-1400 - 1499 : Dark City Scenery
-1500 - 1599 : Doom Ship Scenery
-1600 - 1699 : Egg Rock/Final Fight Scenery
-1700 - 1799 : NiGHTS Items
-	1700 - Axis			72
-	1701 - Axis Transfer (Normal)	61
-	1702 - Axis Transfer (Line)	46
-	1703 - Nights Drone		60
-	1704 - Nights Bumper		82
-	1705 - Hoop			57
-	1706 - Nights Wing		37
-	1707 - Super Loop Powerup	3007
-	1708 - Drill Refill Powerup	3008
-	1709 - Helper Powerup		3009
-	1710 - Egg Capsule		40
-
-1800 - 1849 : Mario Items
-	1800 - Coin			10005
-	1801 - Goomba			10000
-	1802 - Blue Goomba		10001
-	1803 - FireFlower		50
-	1804 - Shell			10
-	1805 - Puma			29
-	1806 - Koopa			19
-	1807 - Axe			12
-	1808 - Mario Bush 1		10002
-	1809 - Mario Bush 2		10003
-	1810 - Toad			10004
-
-1850 - 1899 : Christmas Items
-	1850 - Xmas Pole		5
-	1851 - Candy Cane		13
-	1852 - Snowman			6
-
-1900 - 1999 : Misc Scenery
-	1900 - Stalagmite 0
-	1901 - Stalagmite 1
-	1902 - Stalagmite 2
-	1903 - Stalagmite 3
-	1904 - Stalagmite 4
-	1905 - Stalagmite 5
-	1906 - Stalagmite 6
-	1907 - Stalagmite 7
-	1908 - Stalagmite 8
-	1909 - Stalagmite 9

doc/Linedef Ranges.txt

-	Description	OldNum	NewNum	Description
-	Old Water 	14	Removed	
-
-	Level Parameters/Misc:			
-	Per-Sector Gravity 	64	1	
-	Custom Exit 	71	2	
-	Zoom Tube Parameters 	18	3	
-	Speed Pad 	65	4	
-	Camera Scanner 	63	5	
-	Disable Linedef 	73	6	
-	Flat Alignment 	66	7	
-	Sector Special Parameters	New	8	
-	Mace Parameters	New	9	
-	Sprite Cull Height	New	10	
-	Rope Hang Parameters	New	11
-	Rock Spawner Parameters	New	12
-
-	PolyObjects
-	Marks first line in PolyObject	New	20
-	Explicitly includes a PolyObject line	New	21
-	PolyObject: Parameters	New	22
-	PolyObject: Waving Flag	New	31
-
-	Level-Load Effects:		
-	Instant Floor Lower 	26	50
-	Instant Ceiling Raise 	24	51
-	Continuously Falling Sector 	88	52
-	Continuous Floor/Ceiling Mover 	2	53
-	Continuous Floor Mover 	3	54
-	Continuous Ceiling Mover 	4	55
-	Continuous Two-Speed Floor/Ceiling Mover 	6	56
-	Continuous Two-Speed Floor Mover 	7	57
-	Continuous Two-Speed Ceiling Mover 	8	58
-	Activate Floating Platform 	232	59
-	Activate Floating Platform (Adjustable Speed) 	233	60
-	Crusher 1 (Ceiling to Floor) 	43	61
-	Crusher 2 (Floor to Ceiling) 	50	62
-	Fake Floor/Ceiling	242	63
-	Appearing/Disappearing FOF	New	64
-	Bridge Thinker	New	65
-
-	Floor Over Floors:		
-	"Floor Over Floor: Solid, Opaque, Shadowcasting "	25	100
-	"Floor Over Floor: Solid, Opaque, Non-Shadowcasting "	33	101
-	"Floor Over Floor: Solid, Translucent "	44	102
-	"Floor Over Floor: Solid, Sides Only "	69	103
-	"Floor Over Floor: Solid, No Sides "	51	104
-	"Floor Over Floor: Solid, Invisible "	57	105
-
-	"Floor Over Floor: Water, Opaque "	48	120
-	"Floor Over Floor: Water, Translucent "	45	121
-	"Floor Over Floor: Water, Opaque, No Sides "	75	122
-	"Floor Over Floor: Water, Translucent, No Sides "	74	123
-
-	"Floor Over Floor: Platform, Opaque "	59	140
-	"Floor Over Floor: Platform, Translucent "	81	141
-	"Floor Over Floor: Platform, Translucent, No Sides "	77	142
-
-	Floor Over Floor: Bobbing (Air) 	38	150
-	Floor Over Floor: Adjustable Bobbing (Air) 	68	151
-	Floor Over Floor: Reverse Adjustable Bobbing (Air) 	72	152
-
-	"Floor Over Floor: Floating, Bobbing "	34	160
-
-	Floor Over Floor: Crumbling (Respawn) 	36	170
-	Floor Over Floor: Crumbling (No Respawn) 	35	171
-	"Floor Over Floor: Crumbling (Respawn), Platform  "	79	172
-	"Floor Over Floor: Crumbling (No Respawn), Platform  "	80	173
-	"Floor Over Floor: Crumbling (Respawn), Platform, Translucent "	82	174
-	"Floor Over Floor: Crumbling (No Respawn), Platform, Translucent "	83	175
-	"Floor Over Floor: Crumbling (Respawn), Floating, Bobbing "	39	176
-	"Floor Over Floor: Crumbling (No Respawn), Floating, Bobbing "	1	177
-	"Floor Over Floor: Crumbling (Respawn), Floating "	37	178
-	"Floor Over Floor: Crumbling (No Respawn), Floating "	42	179
-	"Floor Over Floor: Crumbling (Respawn), Bobbing (Air) "	40	180
-
-	"Floor Over Floor: Rising Platform, Solid, Opaque, Shadowcasting "	89	190
-	"Floor Over Floor: Rising Platform, Solid, Opaque, Non-Shadowcasting "	90	191
-	"Floor Over Floor: Rising Platform, Solid, Translucent "	91	192
-	"Floor Over Floor: Rising Platform, Solid, Invisible "	94	193
-	"Floor Over Floor: Rising Platform, Platform, Opaque "	92	194
-	"Floor Over Floor: Rising Platform, Platform, Translucent "	93	195
-
-	Floor Over Floor: Light Block 	49	200
-	Floor Over Floor: Half Light Block 	47	201
-	Floor Over Floor: Fog Block 	46	202
-
-	"Floor Over Floor: Intangible, Opaque "	62	220
-	"Floor Over Floor: Intangible, Translucent "	52	221
-	"Floor Over Floor: Intangible, Sides Only "	67	222
-	"Floor Over Floor: Intangible, Invisible "	58	223
-
-	Floor Over Floor: Mario Block 	41	250
-	Floor Over Floor: Thwomp Block 	54	251
-	Floor Over Floor: Shatter Block 	76	252
-	"Floor Over Floor: Shatter Block, Translucent "	86	253
-	Floor Over Floor: Bustable Block 	55	254
-	Floor Over Floor: Spin Bust Block 	78	255
-	"Floor Over Floor: Spin Bust Block, Translucent "	84	256
-	Floor Over Floor: Quicksand Block 	56	257
-	Floor Over Floor: Laser Block 	53	258
-	Floor Over Floor: Custom 	87	259
-
-	Linedef Executor Triggers:		
-	Trigger Linedef Executor (Continuous) 	96	300
-	Trigger Linedef Executor (Each Time) 	97	301
-	Trigger Linedef Executor (Once) 	98	302
-	Trigger Linedef Executor (Ring Count - Continuous) 	95	303
-	Trigger Linedef Executor (Ring Count - Once) 	99	304
-	Trigger Linedef Executor (Character Ability - Continuous) 	19	305
-	Trigger Linedef Executor (Character Ability - Each Time) 	20	306
-	Trigger Linedef Executor (Character Ability - Once) 	21	307
-	"Trigger Linedef Executor (Race Only, Once) "	9	308
-	Trigger Linedef Executor (CTF Red Team - Continuous) 	10	309
-	Trigger Linedef Executor (CTF Red Team - Each Time) 	11	310
-	Trigger Linedef Executor (CTF Blue Team - Continuous) 	12	311
-	Trigger Linedef Executor (CTF Blue Team - Each Time) 	13	312
-	Trigger Linedef Executor (No More Enemies - Once) 	15	313
-	Trigger Linedef Executor (# of Pushables - Continuous)	New	314
-	Trigger Linedef Executor (# of Pushables - Once)	New	315
-	Trigger Linedef Executors (PolyObject - Land On)	New	316
-	Trigger Linedef Executor (Level Load)	New	399
-
-	Linedef Executor Options:		
-	Linedef Executor: Set Tagged Sector's Floor Height/Pic 	101	400
-	Linedef Executor: Set Tagged Sector's Ceiling Height/Pic 	102	401
-	Linedef Executor: Set Tagged Sector's Light Level 	103	402
-	Linedef Executor: Move Tagged Sector's Floor 	106	403
-	Linedef Executor: Move Tagged Sector's Ceiling 	107	404
-	Linedef Executor: Lower Floor by Line 	108	405
-	Linedef Executor: Raise Floor by Line 	109	406
-	Linedef Executor: Lower Ceiling by Line 	110	407
-	Linedef Executor: Raise Ceiling by Line 	111	408
-	Linedef Executor: Change Calling Sector's Tag 	112	409
-	Linedef Executor: Change Front Sector's Tag 	114	410
-	Linedef Executor: Stop Plane Movement 	116	411
-	Linedef Executor: Teleport Player to Tagged Sector 	104	412
-	Linedef Executor: Change Music 	105	413
-	Linedef Executor: Play SFX 	115	414
-	Linedef Executor: Run Script 	113	415
-	Linedef Executor: Start Adjustable Fire Flicker 	119	416
-	Linedef Executor: Start Adjustable Glowing Light 	120	417
-	Linedef Executor: Start Adjustable Strobe Flash (unsynchronized)	New	418
-	Linedef Executor: Start Adjustable Strobe Flash (synchronized)	New	419
-	Linedef Executor: Fade Light Level 	117	420
-	Linedef Executor: Stop Lighting Effect 	118	421
-	Linedef Executor: Cut-Away View 	121	422
-	Linedef Executor: Change Sky 	123	423
-	Linedef Executor: Change Weather 	124	424
-	Linedef Executor: Change Object State 	125	425
-	Linedef Executor: Stop Object 	122	426
-	Linedef Executor: Award Score 	126	427
-	Linedef Executor: Start Platform Movement 	127	428
-	Linedef Executor: Crush Ceiling Once	New	429
-	Linedef Executor: Crush Floor Once	New	430
-	Linedef Executor: Crush Floor & Ceiling Once	New	431
-	Linedef Executor: Enable 2D Mode	New	432
-	Linedef Executor: Disable 2D Mode	New	433
-	Linedef Executor: Award Custom Power	New	434
-	Linedef Executor: Stop Conveyor	New	435
-	Linedef Executor: Start Conveyor	New	436
-	Linedef Executor: Disable Player Movement	New	437
-
-	Linedef Executor: Execute Linedef Executor	New	450
-
-	Linedef Executor: PolyObject: Door Slide	New	480
-	Linedef Executor: PolyObject: Door Swing	New	481
-	Linedef Executor: PolyObject: Move XY	New	482
-	Linedef Executor: PolyObject: Move XY w/ override	New	483
-	Linedef Executor: PolyObject: Rotate Right	New	484
-	Linedef Executor: PolyObject: Rotate Right w/ override	New	485
-	Linedef Executor: PolyObject: Rotate Left	New	486
-	Linedef Executor: PolyObject: Rotate Left w/ override	New	487
-	Linedef Executor: PolyObject: Start waypoint movement	New	488
-	Linedef Executor: PolyObject: Make Invisible	New	489
-	Linedef Executor: PolyObject: Make Visible	New	490
-
-	Scrollers/Pushers:		
-	Scroll Wall First Side Left 	100	500
-	Scroll Wall First Side Opposite Direction 	85	501
-	Scroll Wall According to Linedef 	254	502
-	Acc Scroll Wall According to Linedef 	218	503
-	Disp Scroll Wall According to Linedef 	249	504
-	Scroll Texture by Offsets 	255	505
-
-	Scroll Floor Texture 	251	510
-	Acc Scroll Floor Texture 	215	511
-	Disp Scroll Floor Texture 	246	512
-	Scroll Ceiling Texture 	250	513
-	Acc Scroll Ceiling Texture 	214	514
-	Disp Scroll Ceiling Texture 	245	515
-
-	Carry Objects on Floor (no scroll)	252	520
-	Acc Carry Objects on Floor 	216	521
-	Disp Carry Objects on Floor 	247	522
-	Carry Objects on Ceiling 	203	523
-	Acc Carry Objects on Ceiling 	205	524
-	Disp Carry Objects on Ceiling 	201	525
-
-	Scroll Floor Texture and Carry Objects 	253	530
-	Acc Scroll Floor Texture and Carry Objects 	217	531
-	Disp Scroll Floor Texture and Carry Objects 	248	532
-	Scroll Ceiling Texture and Carry Objects 	202	533
-	Acc Scroll Ceiling Texture and Carry Objects 	204	534
-	Disp Scroll Ceiling Texture and Carry Objects 	200	535
-
-	Friction 	223	540
-	Horizontal Wind 	224	541
-	Upwards Wind 	229	542
-	Downwards Wind 	230	543
-	Horizontal Current 	225	544
-	Upwards Current 	227	545
-	Downwards Current 	228	546
-	Boom Push/Pull Thing 	226	547
-
-	Lighting:		
-	Floor Lighting 	213	600
-	Ceiling Lighting 	5	601
-	Adjustable Pulsating Light 	60	602
-	Adjustable Flickering Light 	61	603
-	Adjustable Blinking Light (unsynchronized)	New	604
-	Adjustable Blinking Light (synchronized)	New	605
-	Colormap 	16	606

doc/Sector Ranges.txt

-Removed:
-	- Buttons 1-20					690-709
-	- Button 21 (THZ2 A/740 B/741 D/742 E/745	710
-	- Close Door Blazing (Tag 743)			711
-	- Raise Ceiling to Highest (Tag 744)		981
-	- THZ2 Slime Raise (B/712 W713 P714 D715 S716)	986
-
-Stuff to Remove/Change:
-	- Light Blinks On Every 0.5 Seconds		2 Add Linedef Combine
-	- Light Blinks On Every 1 Second		3 Add Linedef Combine
-	- Light Pulses Smoothly			8 Remove
-	- Light Blinks On Every 0.5 Seconds (Sync)	12 Add Linedef Combine
-	- Lights Blinks On Every 1 Second (Sync)	13 Add Linedef Combine
-	- Light Flickers Like Fire			17 Remove
-	? - Damage (Fire) and Current			519 Remove (convert to combination)
-	? - Damage (Water) and Current			984 Remove (convert to combination)
-
-Section 1:
-	1 - Damage (Generic)				11
-	2 - Damage (Water)				983
-	3 - Damage (Fire)				7
-	4 - Damage (Electrical)				18
-	5 - Spikes					4
-	6 - Death Pit (Camera Mod)			16
-	7 - Death Pit (No Camera Mod)			5
-	8 - Instant Kill				10
-	9 - Ring Drainer (Floor Touch)			978
-	10 - Ring Drainer (No Floor Touch)		980
-	11 - Special Stage Damage			9
-	12 - Space Countdown				6
-	13 - Ramp Sector (Increase step-up)		992
-	14 - Non-Ramp Sector (Don't step-down)		996
-	15 - Bouncy Sector (FOF Control Only)		14
-
-Section 2:		<< 4
-	1 - Trigger Linedef Exec (Pushable Objects)	971
-	2 - Trigger LD Exec (Anywhere in Sec/All Pls)	972
-	3 - Trigger Linedef Exec (Floor Touch/All Pls)	973
-	4 - Trigger Linedef Exec (Anywhere in Sec)	974
-	5 - Trigger Linedef Exec (Floor Touch)		975
-	6 - Trigger Linedef Exec (Emerald Check)	967
-	7 - Trigger Linedef Exec (NiGHTS Mare)		968
-	8 - Check for linedef executor on FOFs (ANY)	970
-	9 - Egg Trap Capsule				666
-	10 - Special Stage Time/Rings, Par		990
-	11 - Custom Global Gravity			991
-
-Section 3:		<< 8
-	1 - Ice/Sludge (required?!)			256
-	2 - Wind/Current (required?!)			512
-	3 - Ice/Sludge and Wind/Current			768
-	4 - Conveyor Belt				985
-	5 - Speed Pad (No Spin)				976
-	6 - Speed Pad (Spin)				977
-	7 - Bustable Block Sprite Parameter		1500-1515
-	8 - "
-	9 - "
-	10 - "
-	11 - "
-	12 - "
-	13 - "
-	14 - "
-	15 - "
-
-Section 4:		<< 12
-	1 - Starpost Activator				993
-	2 - Special Stage Goal	Combine			33
-	2 - Exit Sector		Combine			982
-	2 - No Tag Zone		Combine			987
-	2 - CTF: Flag Return	Combine			995
-	3 - CTF: Red Team Base				988
-	4 - CTF: Blue Team Base				989
-	5 - Fan Sector					997
-	6 - Super Sonic Transform			969
-	7 - Spinner					979
-	8 - Zoom Tube Start				998
-	9 - Zoom Tube End				999
-	10 - Finish Line				994
\ No newline at end of file

doc/faq.txt

- SRB2
- Release v1.09, ? 2005.
-
- Last Updated: June 2005
-
- Original game & sources by: Id Software.
- Additions: (c)1998 by: Fabrice Denis & Boris Pereira
-            (c)1999 by: Fabrice Denis, Boris Pereira & Thierry Van Elsuwe
-            (c)2000 by: Boris Pereira & Thierry Van Elsuwe
-            (c)2004 By: AJ, Graue, Alam Arias, Logan Arias & Andrew Clunis
-
- Special thanks to Steven McGranahan,  Lee Killough, Robert Bäuml and Bell Kin for
- their large contribution and to other DooM LEGACY & SRB2 Team members.
-
- Web site: http://www.SRB2.org/
-   e-mail: none@none.com
-
- OpenGL specific:
- Web site: http://legacy.newdoom.com/gl
-
-
- -----------------------------------------------------------------------
- F.A.Q.
- -----------------------------------------------------------------------
-
-
- If you have any trouble with SRB2, you might find a solution
- here.
-
- If you find a solution to a problem that was not listed here,
- please tell us so that we can update the FAQ and help other people!
-
- Mail your hardware/software problems to:
-
- None@none.com subject: FAQ
-
-
- --------
- CONTENTS
- --------
-
- [0] Miscellaneous
- [1] Mouse/Joystick/Keyboard
- [2] Video
- [3] Sound
- [4] Network
- [5] Troubleshooting
-
-
- -----------------
- [0] MISCELLANEOUS
- -----------------
-
- * under win95 or OS/2, I don't have enough memory. How can i handle with ?
-
-   Tell win95 to put more dpmi memory for your dos box.
-   Or use the -mb option.
-
-
-
- ---------------------------
- [1] MOUSE/JOYSTICK/KEYBOARD
- ---------------------------
-
- * My mouse/joystick does not work in SRB2.
-
-   First, check that the mouse/joystick is activated : go at the
-   console and type either 'use_mouse' (or use the respective
-   menuitem) or 'use_joystick'.
-
-   If it tells '0' or off than the mouse/joystick is not used,
-   set the variable to 1. eg: 'use_mouse 1'.
-
-   For the joystick, different values will support different
-   types of joystick, check the console documentation for the
-   command 'use_joystick' for more.
-
-   Even if the mouse or joystick is activated, you have to
-   set up the contols into the Setup Controls menu. That is:
-   tell what use you will make of the mouse/joystick buttons.
-
-
- ---------
- [2] VIDEO
- ---------
-
-
- * Where are the other video modes ? I have only '320x200' in the
-   Video Modes menu.
-
-   DOS
-   ---
-
-   SRB2 adds new video modes only if a VESA2 (or better) driver
-   is present. The VESA2 driver is a standard of 'talking' between a
-   program and the huge amount of different graphics cards
-   available today.
-
-   If you don't have a VESA2 driver, you can download UNIVBE, or
-   SMART DISPLAY DOCTOR from
-
-   http://www.scitechsoft.com/products/ent/free_titles.html
-
-   or if you have an S3 based card, you can download the free
-   software called 'S3VBE'.
-
-   ftp://ftp.externet.hu/pub/mirror/sac/graph/s3vbe318.zip
-   ftp://ftp.digsys.bg/pub/simtelnet/msdos/graphics/s3vbe318.zip
-   http://www.filesearching.com/cgi-bin/s?q=s3vbe318.zip
-   http://www.google.com/search?q=s3vbe318.zip
-
- * The game doesn't restore the video mode I have chosen the last time
-   I played SRB2.
-
-   The current video mode has to be made the 'default' so that it is
-   saved to the config : press the key 'D' on the Video Options menu
-   to set the current video mode the default.
-
-  * I have some problems with OpenGL mode
-
-   Have a look at the FAQ for OpenGL on the glLegacy web site:
-
-   http://www.doomnation.com/gllegacy/faqe.htm
-
- # Linux: I only have a 1024x768 (or 800x600, 1280x1024, ...) resolution
-   in fullscreen mode under X and SRB2 is really really slow. Can I
-   have lower resolutions like 320x200 in fullscreen mode as well?
-
-   Probably yes. SRB2 can only use the resolutions offered by the
-   X-Server. So if all fullscreen modes have a very high resolution you
-   have to modify /etc/XF86Config (or /etc/X11/XF86Config). Use XF86Setup
-   (or the appropriate tool coming with your distribution - sax,
-   xf86config, ...) to do this.
-   If you do not succeed there, you can enter them manually into your
-   XF86Config file. ONLY RECOMMENDED FOR USERS WHO KNOW WHAT THEY DO!
-   For a short guide on how to do this, have a look at the file
-   "Doublescan.txt".
-   In case of doubt consult the XFree86-HOWTO (or ask your system
-   administrator :).
-
- # Linux: I cannot have any fullscreen modes at all!
-
-   You have only modes above 1024x768 in your XF86Config. Proceed as
-   described above.
-
- # Linux: After a certain idle time my screensaver jams the display of
-   SRB2. I can still operate SRB2, but I do not see what's happening
-   and the screensaver won't go away.
-
-   You probably have KDE. The KDE screensaver does not obey the screensaver
-   rules (at least mine, version 1.1). The solution is to deactivate the
-   KDE screensaver and use another screensaver (like the xscreensaver,
-   e.g.). But the hell, when you started SRB2 you should have played it
-   as well and not left it alone!!!
-
- ---------
- [3] SOUND
- ---------
-
- + DOS:I can't have CD audio music, why ?
-
-   Make sure that the MSCDEX driver version 2.0 or later is loaded.
-   If it says 'MSCDEX version xxx' at game startup, and you still
-   don't hear the cd music, then probably your card doesn't respond
-   when SRB2 tries to set the cd volume. If so, make sure your sound
-   card's mixer have the cd volume set up so that you can hear something.
-
- + When the CD plays, the game is very 'jerky'. It doesn't do that when
-   I type 'cd off' in the console.
-
-   You have an old/bad cd driver, that can take up to a second to
-   respond to cd driver commands. Either get the latest version of
-   your driver, or turn cd update off. Check 'cd_udpate' in the
-   console documentation for more.
-
- * DOS:How can I *ALWAYS* disable the sounds or music of the game ?
-
-   Edit the allegro.cfg file and set digicard/midicard to 0 (none)
-
- * DOS:My sterero sound is reversed, how can I set it the right way ?
-
-   Change the console variable 'stereoreverse' to either 1 or 0.
-   Or, you can edit the allegro.cfg file, and set the 'flip_pan' variable.
-
-
- * DOS:The sounds are too 'slow', or 'low-pitched'
-
-   It seems to be a problem of the auto-detection of some 8bit sound
-   cards. You will have to set manually the 'sb_freq' value in the
-   allegro.cfg file to a lower value : 11906, 16129.
-
- * DOS:SRB2 doesn't play any sound/music, but I have a sound
-   blaster genuine/compatible card.
-
-   If you have a genuine or compatible SoundBlaster card, it is very
-   important that you set the BLASTER environment variable.
-
-   If you are playing under DOS, and never installed your sound card
-   under DOS, run the setup of your sound card for DOS.
-
-   Check if the BLASTER variable was set: type 'SET' under dos
-   (or DOSbox)
-
-   Do you see something like 'BLASTER=A220 I5 D1 ...' ?
-
-   Yes? If you don't hear sounds/music, then tweak the settings in the
-   allegro.cfg file until you get something, first try changing the
-   type of the sound card, it is not always properly detected.
-
-   No? You have to set this variable in order that your sound card is
-   detected. Run the setup that was shipped with your sound card, and
-   make sure you run the setup for DOS too, it will usually add a
-   line of the type 'SET BLASTER=... ...' in the autoexec.bat file.
-
-
- * DOS:How can I have better midi music on my 8bit sound card ?
-
-   Use the DIGMID driver, it is supported in SRB2.
-
-   What the hell is this? Well, the Gravis Ultrasound uses digital
-   samples to play midi music. On a simple 8bit card, you can use digital
-   samples too, which will sound usually better than what is output
-   by the poor fm synthesis chip of 8bit cards.
-
-   You will need to get a Gravis Ultrasound patch set, you can find
-   several ones for free on internet, it consists of a bunch of '.pat'
-   files which are the digital samples to play the midi instruments
-   (eg: piano, conga, guitar, ect.).
-
-   Check the Allegro homepage for some links to GUS patches:
-   http://alleg.sourceforge.net/digmid.html
-   http://alleg.sourceforge.net/
-   http://www.talula.demon.co.uk/allegro/digmid.html
-   http://www.talula.demon.co.uk/allegro/
-
-   Now to activate the DIGMID driver:
-
-   Set the 'midi_card' value to 8 (DIGMID) in the allegro.cfg file.
-   Make sure you leave the 'digi_voices' blank, or set it to a low
-   value, because the midi music will use digital voices.
-   At the end of the allegro.cfg file, set the 'patches' value
-   to the path, where you have installed a Gravis Ultrasound midi
-   patch set. eg: patches = d:\music\midipat\
-
- # Linux: CD music does not work or only works when run as root.
-
-   We do not encourage you to run SRB2 as root (you never know
-   what SRB2 can do to your system - it's a mighty piece of code :).
-   There is a common problem with ATAPI CD-rom drives, which are
-   treated as harddisks. Usually there is a link /dev/cdrom pointing to
-   device hd[b,c,d]. As harddisks are not supposed to be read directly
-   via this device (especially not by a common user), there are no read
-   permissions for "all". For CD-roms you can savely set read permissions
-   unless you are very paranoid. Assuming your CD-rom drive is /dev/hdc,
-   set permissions with "chmod +r /dev/hdc" (as root). SCSI CD-rom drives
-   should not have this problem. But if they do, proceed as described
-   with ATAPI drives.
-
- # Linux: The CD music volume is not set properly.
-
-   Go to the console and type "jigglecdvolume 1".
-
- -----------
- [4] NETWORK
- -----------
-
- * Where can I find Internet servers ?
-
-   For the moment there is one public server.
-   http://srb2.servegame.org/ Master server web page
-   srb2.servegame.org:28910 current Master Server
-
- * When I start SRB2 with -server or -connect it say :
-    "BinToPort: Address already in use (EADDRINUSE)"
-
-   It appears only when SRB2 crashes or when you leave with ctrl-break.
-   use -udpport 12345 (or any other free slot) on both sides (client and
-   server).
-
-   This can also happens when there is already a SRB2 running on your
-   computer if you whant to try two SRB2 running on the same computer
-   use -clientport 12345 (or any other free slot). Then the second will
-   connect to the first one.
-
- * Do you use the tcp protocol ?
-
-   No, we use the udp protocol which is faster, but don't worry udp is a
-   part of the internet protocol.
-
-
- -------------------
- [5] Troubleshooting
- -------------------
-
- # Linux: SRB2 is hung in fullscreen mode and won´t let me leave.
-   What shall I do?
-
-   Some people press the reset button, but hey, we are not in the
-   stoneage of operating systems! There are two "proper" ways to
-   get out: kill your X-Server. You can usually do this by pressing
-   "CTRL-ALT-BACKSPACE". But if you have other open applications with
-   important data (probably hacked away on your diploma thesis for 3
-   weeks without saving once) you can also kill SRB2 directly. Press
-   "CTRL-ALT-F2" and you will get to a console. Log in, type
-   "killall llxSRB2" and switch back to the X-Server with "CTRL-ALT-F7".
-   Some X-Server crash on this procedure - blame the X-Server for the
-   loss of 3 weeks work on your diploma thesis :)

doc/manual/manual.htm

-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
-<html>
-<head>
-	<title>
-		Sonic Robo Blast 2 Manual
-	</title>
-	<link rel="stylesheet" type="text/css" href="srb2manstyle.css">
-	<!-- Borrowed some javascript code so the height of the iframe is equal to the size of the document - Sonict -->
-	<script type="text/javascript">
-	/* free code from dyn-web.com */
-
-	function getDocHeight(doc) {
-		doc = doc || document;
-		// from http://stackoverflow.com/questions/1145850/get-height-of-entire-document-with-javascript
-		var body = doc.body, html = doc.documentElement;
-		var height = Math.max( body.scrollHeight, body.offsetHeight,
-			html.clientHeight, html.scrollHeight, html.offsetHeight );
-		return height;
-}
-
-	function setIframeHeight(id) {
-		var ifrm = document.getElementById(id);
-		var doc = ifrm.contentDocument? ifrm.contentDocument: ifrm.contentWindow.document;
-		ifrm.style.visibility = 'hidden';
-		ifrm.style.height = "10px"; // reset to minimal height in case going from longer to shorter doc
-		ifrm.style.height = getDocHeight( doc ) + "px";
-		ifrm.style.visibility = 'visible';
-	}
-	</script>
-	<meta http-equiv="Content-type" content="text/html; charset=UTF-8">
-</head>
-<body>
-	<p class="c1">
-		<img src="manual_img/sonicname2.png" alt="SONIC" width="136" height="36">
-		<br>
-		<img src="manual_img/srb2banner.png" alt="ROBO BLAST 2" width="224" height="43">
-	</p>
-	<p class="c1">
-		<big><big><strong>Manual</strong></big></big>
-	</p>
-	<table class="cf" align="center">
-		<tr><td class="c">
-		<ul class="hmenu">
-			<li class="hmenu"><a class="hmenu" href="intro.htm" target="ifrm">Main</a></li>
-			<li class="hmenu"><a class="hmenu" href="items.htm" target="ifrm">Items</a></li>
-			<li class="hmenu"><a class="hmenu" href="playerabilities.htm" target="ifrm">Player Abilities</a></li>
-			<li class="hmenu"><a class="hmenu" href="basicplay.htm" target="ifrm">Gameplay</a></li>
-			<li class="hmenu"><a class="hmenu" href="surroundings.htm" target="ifrm">Surroundings</a></li>
-		</ul>
-		</td></tr>
-		<tr><td class="c">
-		<ul class="hmenu">
-			<li class="hmenu"><a class="hmenu" href="multiplayer.htm" target="ifrm">Multiplayer</a></li>
-			<li class="hmenu"><a class="hmenu" href="zones.htm" target="ifrm">Zones</a></li>
-			<li class="hmenu"><a class="hmenu" href="controls.htm" target="ifrm">Controls</a></li>
-			<li class="hmenu"><a class="hmenu" href="consolecommands.htm" target="ifrm">Console Commands</a></li>
-			<li class="hmenu"><a class="hmenu" href="misc.htm" target="ifrm">Misc</a></li>
-		</ul>
-		</td></tr>
-	</table>
-	<hr>
-	<p class="c1">
-		<!-- The "onload" property of the iframe makes an error when validated through the W3C validation checker. -->
-		<!-- This will not be fixed as it isn't worth the time to fix it up properly. - Sonict -->
-		<iframe id="ifrm" name="ifrm" src="intro.htm" onload="setIframeHeight(this.id)"> </iframe>
-	</p>
-</body>
-</html>

doc/rules.txt

-SVN-RULES
-
-- As you can see, there is sub-directory in the repository, one for eatch
-  platform (djgpp (dos),win32,SDL) the root directory is for all platform,
-  so take care of the order we have put in.
-- do not commit/upload tests of bugged code, try to fix a maximum of know
-  bugs and update know bugs list in source.txt. If you must commit your source
-  make your code in #ifdef so we can disable it
-- SRB2 is a modification of doom/Doom Legacy source. We allow additionnal feature
-  and visual addition.
-- Maximize communications between members, do not impose your changes, if your
-  are not sure about a feature/change, talk about it in irc://irc.esper.net/srb2 chat room.
-
-CODE-RULES
-
-- We use no tab, 4 space indent, and tab size 8 (in case some tab have filtred
-  and for makefile)
-- Self documented code, variable and function must have a name that help
-  understand the code, so do not call variable and function a,b, a2, ...
-- the usage of extern in a c file is prohibited, except for declaration of a
-  function with body (so it is like public keyword in c++)
-  Also function protos haren't allowed for external function, put it un the
-  corresponding h file.
-- Try to minimize #ifdef usage for :
-  - code readability
-  - the main code is for all port so if something is good for a platform all
-    platform can benefit by this feature
-- Take care of platform dependent code, we would like to have code that work
-  on Dos, Win32, SDL, ... little and big endian, software/Glide/OpenGl.
-
-GOOD PRACTICE
-
-- Try to put as mush static variable and function on module so it help to
-  understand the role of the varaible/function in the module also this
-  help the compiler to optimize
-- minimise global variable
-- make a log of your work, so you don't need to put a lot of comment in
-  the code, this will also help us to update the what's new section of doc
-  when doing final release

doc/source.txt

-
-1. Compile SRB2
-2. Explanation of the code
- 2.1 The memory model
- 2.2 Hardware Texture model
-
-1. Compile SRB2
-=================
-
-DOS
----
-
-need:
-- djgpp 2.03     (http://www.delorie.com/djgpp/)
-- allegro 3.12   (http://alleg.sourceforge.net/index.html)
-(
-- libsocket 0.7.4 (beta 4) or better
-   for use with Winsock 1.1 (example Windows 3.1)
-  (http://www.phekda.freeserve.co.uk/richdawe/lsck/lsck.htm)
-   OR
-- Wattcp-32 v2.2 dev.rel 6 or better
-   For use with a packet driver
-  (http://www.bgnett.no/~giva/)
-  (http://groups.yahoo.com/group/watt-32/)
-  (http://groups.yahoo.com/group/watt-32/files/v2.2/)
-)
-- bcd 1.03 (inlcude in this package)
-- gcc 2.95.2 is recommended
-- nasm 0.98 (or better)     (http://nasm.sourceforge.net/)
-
-compile:
-make
-make WATTCP=1 (to make a Wattcp-32 version)
-
-debug:
-when craching SRB2 will return eip
-type make asm, then you will have a 8 megs srb2.s (a assembler file)
-the you can find the faulting instruction and function
-
-------------------------------------------------------------------------
-
-Linux/SDL
------
-
-need:
-- tested with gcc 2.95 and 3.X.
-- SDL 1.2
-- SDL_mixer 1.2
-- ibogg and libvorbis (http://Xiph.org/)
-- nasm 0.98 (or better)(http://nasm.sourceforge.net/) only with 2.95, else add CC30=1
-
-compile
-make LINUX=1
-
-debug:
-gdb ?
-
-------------------------------------------------------------------------
-
-Win32
------
-
-need :
-- glide 3.x sdk (optional)  (http://www.3dfx.com)
-- directx6 sdk (or higher)  (http://www.micosoft.com/directx)
-- nasm 0.98 (or better)     (http://nasm.sourceforge.net/)
-- use src\win32\wLegacy.dsp
-- VC6 should also work with VC5, and VS.NET 200X
-
-debug:
-press on "step over" with the release version (there is some debug info
-on it). Then change the eip in the regster window when you will type
-enter the edi will go to the faulting instruction. don't forget that
-you can follow the stack for calls.
-You can also use trace with the debug version but add -win and -nomouse.
-
-------------------------------------------------------------------------
-
-Win32/minGW/SDL
------
-
-need:
-- tested with gcc 2.95 and 3.X.
-- can also use Dev-C++ 5.0 beta 9 (4.9.9.0) from http://www.bloodshed.net/dev/devcpp.html
-- SDL 1.2
-- SDL_mixer 1.2
-
-compile
-make minGW=1 SDL=1
-or use src\SDL\Win32SDL.dev with Dev-C++ 4.9.9.0 or later
-
-debug:
-gdb ?
-
-------------------------------------------------------------------------
-
-WinCE/SDL WIP
------
-
-need:
-- ActiveSync 3.8
- http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
-
-- ActiveSync 3.7.1, if 3.8 isn't available for your language
- http://www.microsoft.com/windowsmobile/downloads/activesync37.mspx
-
-- eMbedded Visual Tools 3.0 - 2002 Edition
- http://www.microsoft.com/downloads/details.aspx?FamilyID=f663bf48-31ee-4cbe-aac5-0affd5fb27dd
-
-- Pocket PC 2000 SDK
- http://www.microsoft.com/downloads/details.aspx?FamilyID=bb3f4d7b-de2a-4e1a-a175-26a68c301ac4
-
-- Pocket PC 2002 SDK (eMVT 3.0 2002 Ed. comes with this)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=2dbee84a-bd94-4167-b817-2b2e548b2e92
-
-- Pocket PC 2002 SDK Emulator Images (eMVT 3.0 2002 Ed. comes with this)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=25f4de97-ae80-477a-9df1-496b85b3d3e3
-
-- eMbedded Visual C++ 4.0
- http://www.microsoft.com/downloads/details.aspx?familyid=1DACDB3D-50D1-41B2-A107-FA75AE960856
-
-- eMbedded Visual C++ 4.0 SP3 (Win CE 4.0-4.2)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=5bb36f3e-5b3d-419a-9610-2fe53815ae3b
-
-  OR
-
-- eMbedded Visual C++ 4.0 SP4 (No SH3 support,Win CE 4.0-5.0 support)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=4a4ed1f4-91d3-4dbe-986e-a812984318e5
-
-- eMbedded Visual C++ 4.0 Update 5625 (SP4 only)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=aa282a6d-6f57-436d-8c10-0ec02d94f5b1
-
-- Windows CE: Standard Software Development Kit
- http://www.microsoft.com/downloads/details.aspx?familyid=a08f6991-16b0-4019-a174-0c40e6d25fe7
-
-- SDK for Windows Mobile 2003-based Pocket PCs
- http://www.microsoft.com/downloads/details.aspx?FamilyId=9996B314-0364-4623-9EDE-0B5FBB133652
-
-- Emulator Images for Windows Mobile 2003 Second Edition software for Pocket PC
- http://www.microsoft.com/downloads/details.aspx?familyid=5C53E3B5-F2A2-47D7-A41D-825FD68EBB6C
-
-- Microsoft Device Emulator 1.0 Community Preview
- http://beta.microsoft.com Use Guest ID "MSDEVICE" to access the Community Preview website
-
-- Windows CE Utilities for Visual Studio .NET 2003 Add-on Pack 1.1
-  (if you also have VS 2003 installed, you need this to install Win CE 5.0 SDK, else no need)
- http://www.microsoft.com/downloads/details.aspx?FamilyId=7EC99CA6-2095-4086-B0CC-7C6C39B28762
-
-- Windows CE 5.0: Standard Software Development Kit (eMC++ 4 SP4 only)
- http://www.microsoft.com/downloads/details.aspx?FamilyID=fa1a3d66-3f61-4ddc-9510-ae450e2318c3
-
-- SDL 1.27 (use patch and zip in tools\SDL1.2.7_CE)
-
-compile
-use src\SDL\WinCE\SRB2CE.vcw
-
-debug:
-?
-
-
-2. Explanation of the code
-==========================
-
- 2.1 The memory model (original) (z_zone.c) (by BP)
- --------------------
-
- SRB2 allocate a heap of 6/32/48 megs at begining and provide a Z_Malloc function
- to allocate in this heap.
-
-   Z_Malloc( int size,int tag,void* user )
-
-    size is the size in byte
-    tag can be : PU_STATIC   allocated static (like malloc do)
-                             call Z_Free to free it
-                 PU_LEVEL    same as static but the zone is "tagged" with the
-                             tag PU_LEVEL, when calling
-                             Z_FreeTag (PU_LEVEL, PU_LEVEL) all zone tagged
-                             with PU_LEVEL are freed (at the end of the level)
-                 PU_CACHE    this one _can_ be freed automatiquely by one other
-                             call to Z_Malloc. the *user point to a pointer
-                             to this zone so when freed automatiquely the
-                             pointer is set to NULL so eatch time you use it
-                             you must check if the pointer is not NULL and
-                             reload it.
-
- (...)
-
- 2.2 Hardware Texture model (by BP)
- --------------------------
-
- Eatch texture/patch/flats/pic in SRB2 are converted to hardware texture at
- runtime (the GlideMipmap_s structure (hw_data.h)). I will call hardware
- texture a gr_texture so there is no confusion.
-
- To remind you :
-  - Texture are set of patch and are associate to linedefs (walls) can be
-    upper, lower or middle texture. It can have hole on it.
-  - patch are sprites (the doom patch are run of vertical lines)
-  - flats are used for floors and ceiling of sectors and have size of 64x64
-    it can't have hole on it
-  - pic are new legacy format for picture, it can only handle plain texture
-    like flats it is now used for hud in full screen for the main picture
-    of legacy and for coronas (the format was extended to handle 32 bit color
-    or intensity + alpha, not all are implemented at this time)
-
- Since patch, flat and pic are basic structure represented by only one lump in
- the wad, the wad loader allocate for eatch lump a GlideMipmap_s (cache3Dfx)
- and init data field to NULL. Since the data structure is allocated in
- PU_3DFXCACHE (like PU_CACHE) the data will be initilised when needed
- (hw_cache.c).
-
- The GlideMipmap_s structures for textures are initialized on
- HWR_PrepLevelCache (hw_cache.c) it is called in P_SetupLevel (load level)
- the number of textures is computed with TEXTURE1, TEXTURE2 lumps since this
- can be changed in runtime in SRB2 (load a wad while runing) it must be
- reallocated. Well, at this time it is realloceted at eatch level start. We
- can do better, since numtextures change only when a wad is loaded.
-
- The 3dfx driver use glide3, it load gr_texture in gr_texture memory of the
- card in fifo order when there is no more place it remove the first gr_texture,
- the downloaded field of GlideMipmap_s go to false and when needed it is
- reloaded in gr_texture memory. In OpenGl, since OpenGl keep texture in there
- own memory and handle gr_texture memory of the card we no more need to
- redownload it but if we not free time to time gr_texture memory in opengl,
- it will get alot of memory, so the gr_texture memory is cleared at eatch
- new level (same time of texture reallocation). Opengl and 3dfx link the
- loaded gr_texture with the nextmipmap field of GlideMipmap_s so before clear
- textures of the heap we MUST free gr_texture memory of OpenGl or 3dfx !
-
- SRB2 can also draw patch with a differant colormap (thanks to Hurdler).
- When needed it create the same gr_texture but just with a differant colormap.
- This one is linked with the original in the GlideMipmap_s with the
- nextcolormap field.
-
- So when a polygone with a gr_texture must be drawn, first we check if the
- gr_textures is not allready loaded in hadware memory (downloaded field) if
- not then we check if gr_texture data is there (not grabbed by z_malloc
- function) if not we must recompute it eatch type of gr_texture (texture,
- patch, flat, pic have there own methode) the we can send the gr_texture
- to 3dfx or OpenGl.

extras/conf/SRB2_22Doom.cfg

-/************************************************************************\
-	Zone Builder Game Configuration for Sonic Robo Blast 2 Version 2.2
-\************************************************************************/
-
-// This is required to prevent accidental use of a different configuration
-type = "Doom Builder 2 Game Configuration";
-
-// This is the title to show for this game
-game = "Sonic Robo Blast 2 - 2.2 (Doom format)";
-
-// This is the simplified game engine/sourceport name
-engine = "zdoom";
-
-// Settings common to all games and all map formats
-include("Includes\\SRB222_common.cfg", "common");
-
-// Settings common to Doom map format
-include("Includes\\SRB222_common.cfg", "mapformat_doom");
-
-include("Includes\\Game_SRB222.cfg");
-
-// Script lumps detection
-scriptlumpnames
-{
-	include("Includes\\SRB222_misc.cfg", "scriptlumpnames");
-}
-
-// THING TYPES
-thingtypes
-{
-	include("Includes\\SRB222_things.cfg");
-}
-
-//Default things filters
-thingsfilters
-{
-	include("Includes\\SRB222_misc.cfg", "thingsfilters");
-}
\ No newline at end of file